We have supplied our Lighting poles to Australia, Columbia, England, Kuwait, Iraq, Philippines, Pakistan and etc.
Our Lighting poles are made from quality sheet through bending,
forming, automatic welding and hot galvanization. We can reach one-run
machining length of 14m and can bend sheet of thickness up to 45mm. We
adopt advanced welding procedures, automatically weld main joints and
reach rank-II welding quality.
Lighting Pole, Transmission Line Pole, Solar Lighting Pole, Single Arm Lighting Pole Jiangsu Xinjinlei Steel Industry Co., Ltd. , https://www.jinleisteeltower.com
Main parameter
1.      Specification of rolling material: Width: 480mm; Thickness:3-4mm;        Q235A Galvanized steel sheet.
2.      Working speed: 10 -12m/min
3.      Roller steps: 13 pairs main rollers & 7 pairs flattening rollers
4.      Material of roller: GCr15 bearing steel, quenched, HRC58°-62°
5.      Material of main shaft: superior 45# steel, tempered.
6.      Diameter of main shaft: ¢85 mm
7.      Main motor power: 35 kw
8.      Transmission:double-row chain drive
9.      Structure of forming machine: wallboard
10.    Flattening motor power: 2.2 kw
11.    Hydraulic motor power: 11 kw, Pressure: 20 Mpa
12.    Material of Punching and Cutting mould:Cr12
13.    Cutting blade heat-treated.:HRC58°-62°
14.    Punching and Cutting Way:Adopt hydraulic driving, flat panel punching, cutting after roll forming.
15.    Electric control system: whole machine adopts PLC frequency control, Cut-to-length error≤±2mm
16.    Machine dimension:13500mm×2700mm×1600mm
Equipment configuration
Manual Feeding device (3 T capacity), transmission, flattening device, before-punching device (2 sets), main machine and roller (including guide table), cutting (after roll forming) device, hydraulic system, electric control system, run out table, etc.
Technological process figure
Â
Model NO.: BH-HG
HS Code: 8455229090
Profile drawing