What are the classification of pillow packing machine, how to maintain and clean

Introduction: Through this article, you can learn about the three major categories of pillow packaging machines and how to maintain and clean them.

Pillow type packaging machines can be divided into: rotary pillow type packaging machines, lower paper type pillow packing machines and reciprocating pillow type packaging machines.

There are the following differences between rotary pillow packing machines and lower paper-pass pillow packing machines and reciprocating pillow packing machines:

1. The rotary pillow type packaging machine cuts the packaging film through the rotary motion of the transverse sealing cutter to complete the packaging;

2. Under the paper-pillow type packaging machine, the film roll of the package is located below the reference level of the packaging machine (that is, the packaging film is below the horizontal sealing knife);

3. The reciprocating pillow packing machine cuts the packaging film by means of a horizontal seal cutter moving up and down under the action of compressed air to complete the packaging.

Pillow type packaging machine maintenance and cleaning methods:

1. Before cleaning the equipment for cleaning the pillow packing machine, turn off the power first to ensure the safety of the man-machine.

2. Wipe the surface and outer surface of the machine with a clean damp rag to ensure that the pillow packing machine is not scratched. This cleaning and maintenance work should be carried out regularly.

3. Use compressed air to remove product debris from the feeding mechanism and the middle and end seals.

4. Remove the attached film fragments from the end-sealing knife with a wire brush coated with oil. If the packaging material remains on the knife, this will affect the packaging of the next round of products, resulting in poor packaging.

5. The solid state breaker burns out, the temperature control table is damaged, and the temperature meter can't control the temperature when the thermocouple is damaged. The maintenance method is to replace the thermocouple, replace the temperature control meter, and replace the heating element.

6, there is the pillow packaging machine feed and exit, will leave product debris, must be cleaned, use the air compressor to clean, the effect is also very good.

Source: Foshan Chuanyue Packaging Machinery Co., Ltd.

QR Security Label Sticker

We print 2-dimensional barcode, QR code onto holographic white area which is easily to be read by equipment. This hologram label is developed for QR code print only. Once you have a QR reader app on your smartphone, you can point your camera phone at these codes and immediately grab useful information.

QR Code label is a new technology of encoding,printing,distinguish,data collection and management. It can indicate the producing areas,manufacturers,names of goods,date of manufacture,classification codes

of the books,start stop site of the package,category,date and any other information.



Qr Security Label Sticker,Qr Code Security Label,Qr Security Sticker,Qr Label Sticker

Shenzhen Tuteng Anti-Counterfeiting Co., Ltd. , https://www.szholographicsticer.com