The correct method of safety belts for aerial vehicles

1. After adjusting the seat, sit straight. Grab the lock tongue on the head of the harness, pull the harness down along the body, do not kink the harness, and then snap the latch into the buckle. At this point, remember to slam the tongue again and make sure the seat belt is fully locked. Don't tilt the seat back too far. Otherwise, the seat belt will not stretch and wind properly.

2. The seat belts in different locations. A common shoulder harness should be tied to the shoulders, across the chest and must not be placed under the arm. The waist belt should be as low as possible, close to the lower part of the hip and not tied at the waist. The advantage of this system is that the impact force at the time of collision will act on the pelvic bone to ensure the stability of the human body. After the waist belt is fastened, it is better to pull down the waist belt at the buckle end and pull the shoulder belt upwards.

3. Do not press the seat belt on a hard or fragile object. Do not put glasses, keys, mobile phones, etc. on the chest pocket.

Heat Treated Steel Tube

We are manufacturer of heat treated steel pipes include quenched and tempered steel pipe, normalized steel pipe and annealed steel pipe among carbon steel pipe and alloy steel pipe. Our advantages and more services of heat treated steel pipes includes:

1) Wide range of sizes, out diameter from 20mm to 100mm

2) Customized Length from 100mm to 12000mm

3) Good surface roughness: 0.4um to 1.5um

4) Good straightness: 0.5mm/m to 2mm/m

5) Matched further processing: Grinding, polishing, straightening

5) Anti-rusty package

7) Full sets of testing equipment: Surface, Dimenstion. Mechanical properties testing

8) Fast delivery time

Quenched and Tempered Pipe,Quenched and Tempered Steel Pipe,Quenched and Tempered Steel Tubes,Qt Steel Pipes,Qt Steel Tubes

SHANDONG LE REN SPECIAL STEEL CO., LTD. , https://www.sdhighstrengthsteelbolts.com