1 The "Technical Requirements for the Safety of Grinding Machines" must be observed.

2 The workpiece must be firmly clamped. When adjusting the stroke, be aware of possible collisions. The first trip must be slowly fed.

3 Measure the workpiece and adjust the travel stop.

4 Before driving, the front end of the grinding head must first enter the workpiece and then drive. Avoid pinching your fingers during operation.

5 When the automatic feed is performed, the stroke limit must be properly adjusted and firmly secured before starting up.

6 During the movement of the workpiece, the stroke cannot be adjusted.

7 Protect electrical equipment against oil, coolant, and dust. Electrical wires are not exposed to prevent leakage due to frictional damage.

8 The safety device must be complete and reliable and must not be dismantled at will.

9 CNC Honing Machines must also comply with the relevant provisions of the "CNC Machine Safety Technical Operational Regulations."

K Cup Coffee Maker

K Cup Coffee Maker,Best Espresso Machine,Coffee Makers,Small K Cup Coffee Maker

Aiosa , https://www.nbaiosa.com