In January 2015, Dongfeng Cummins' product and application engineer teamed up with the deputy chief engineer of Dongfeng Heavy Industry to come to a white and green mountain range about 20 kilometers southwest of Mozhugongka County in Lhasa City, Tibet to understand the operating environment of the mining area and discuss the complete vehicle and engine pairing of the mining area. Adaptability requirements for working conditions. This belt, with an average elevation of 5,400 meters above sea level, has a bad climate, is deserted but has huge wealth, and is China's largest copper mining area. The mining area is the largest single industrial project in the Tibet Autonomous Region. The mining area is currently undergoing preparations such as road construction and infrastructure. A large-scale blasting operation is about to commence afterwards. The mining period will last for 50 to 70 years, and the mountains here will be leveled out and even become deep pits. The Dongfeng Heavy Industry Mining Dump Truck with Dongfeng Cummins QSZ13 engine will be transported here as a protagonist of “Yugong Yishanâ€. After investigation, engineers concluded that the most common problem of the engine in the mining area is that the fuel filter is easy to be clogged, leading to difficulty in starting. This type of problem is mainly caused by the poor quality of the oil in the mining area. In response to this type of problem, Dongfeng Cummins's electronically controlled engines have all installed “oil-water-bao†devices. At the same time, the entire vehicle will also be installed with high-accuracy filtering, high-capacity ash, or even secondary vehicle coarse filtering to maximize the Remove impurities from the fuel and reduce engine failures that may result. In addition, maintenance on time according to the maintenance cycle of the Dongfeng Cummins engine is also a preventive measure to reduce breakdowns. We believe that after careful and detailed customer research and analysis, we will take appropriate measures and make full preparations. In the future, Dongfeng Heavy Industry Mine Dump Trucks equipped with “Consumers†will soon emit more light and heat on the roof of the world to bring more benefits to customers. Multi-value returns. Hot Melt Adhesive For Pearl Cotton 1. Pearl cotton is divided into porous type and ordinary type. For the porous type, it is necessary to pay attention to the fact that there can be no drawing during the viscose process, so it is necessary to choose the pearl cotton hot melt adhesive particles that are not drawn.
5. The pearl cotton is bonded with other materials, such as honeycomb cardboard. At this time, it is necessary to consider whether it can stick to the two materials of pearl cotton and cardboard, and select the appropriate hot-melt glue particles according to the actual requirements.
Hot Melt Adhesive For Pearl Cotton,Adhesive For Pearl Cotton,glue For Pearl Cotton GUANGZHOU INTERNET WOOD GLUE MANUFACTURER CO. LTD. , https://www.hotmeltadhesiveiwg.com
This figure is only for illustrating working conditions, not mentioned in the text
2. Pearl cotton is divided into white and colored. Generally, white pearl cotton is common, and colored pearl cotton requires transparent or consistent color hot melt adhesive particles for the color of hot melt adhesive.
3. Pearl cotton is divided into large and small pieces. The bonding process of large pieces of EPE takes a long time, and it is necessary to choose hot melt adhesive particles with a slower curing speed. The bonding process of small pieces of pearl cotton will be faster, and it is necessary to choose hot melt adhesive particles with fast curing speed.
4. There are different density in pearl cotton foam. The pearl cotton with a relatively high surface density needs to choose a more viscous pearl cotton rubber particle, because the pearl cotton with a high surface density is relatively less sticky.