The second phase capacity expansion project of Chery Jaguar Land Rover Changshu Plant is underway and will increase capacity by 70,000 units after completion. It was learned from Changzhou Environmental Protection Bureau that the engine expansion project of Chery Jaguar Land Rover Automobile Co., Ltd. will realize the assembly and test production capacity of two series of three-cylinder and four-cylinder engines. Jaguar Land Rover is currently developing a 1.5T three-cylinder engine. According to the information released by the Changzhou Development and Reform Commission, this engine is expected to be made in China, and three models are expected to be carried.
LINA Extrusion Pelletizer
Most of the polymer must be kneaded and then granulated before it is made into a final product. Sorted by pelletizing ways, LINA rubber & plastic granulator can be divided into four categories: 1. Hot-cutting and air-cooling pelletizing method. 2. Under-water granulating method. 3. Water-strand extrusion method. 4. Water-ring granulation method. LINA pelletizer can meet the granulation needs of high-viscosity and low viscosity rubber and plastic materials, as well as some new materials and chemical additives.
LINA Water Strand Pelletizing Machine
LINA's water strand granulating machine adopts twin-screw extruder barrel and modular screw design. According to the processed materials and formula requirements, configurations such as length and diameter ratio, barrel structure, screw arrangement, filter change structure, number and location of exhaust, feeding methods, electrical control can be optimized. LINA rubber and plastic water strand granulator is suitable for kinds of renewable materials, outlet materials, glass fiber, nylon, ABS, high concentrated masterbatch and so on. LINA water pull pelletizer line is currently using the latest technology, its cooling effect is excellent, its pelletizing system is independent, and the outcome particles are even and beautiful.
Advantage of LINA Pelletizing Line
1. The unit has the whole unit process chain, sound and light failure alarm and fast lock fault point and other control functions. All parts that are in contact with the material are made of stainless steel.
2. High accuracy of temperature control system to ensure the temperature sensitivity of the material.
3. It adopts the drop type separating method after cutting process, to avoid Particle agglomeration and ensure particle cooling.
4. Feeding system of the pressing machine adopts heater and reversing device to solve problem of power outage, material crash and cleaning.
5. Especially, the barrel and die head adopts advanced foreign techniques to ensure and control the dangerous occurred when the pressure is uncontrollable. The honeycomb filter plate is easy to clean and quickly change the mesh and the die head t easy to leak.
6. The hoist adopts automatic return technology to ensure the working efficiency.
7. The technological combination of dual-pull forced feeder and single screw not only meet the high requirement of secondary continuous mixing, but also solve the problem of time and power consuming of traditional working process.
Specifications of LINA Extrusion Granulating Line
Name
Mode
Capacity of Kneader
Screw length to diameter ratio
Screw diameter
Dimension
LINA Extrusion Pelletizing Line
LN-10/70
10L
12:01
70mm
2200*1000*1150
LN-10/75
10L
12:01
75mm
2650*1100*1250
LN-35/100
35L
12:01
100mm
3800*1090*1690
LN-55/120
55L
12:01
120mm
3800*1090*1690
LN-75/135
75L
12:01
135mm
3850*2350*3280
LN-110/150
110L
12:01
150mm
5100*2000*1500
LN-110/165
110L
12:01
165mm
5100*2000*1500
Water Strand Extrusion Pelletizer water cooling strand extruder pelletizer, single screw exturder pelletizing line, single screw pelletizing line, plastic water strand extrusion pelletizer, double screw extruder with water cooling strand LINA Machinery Industrial Co.,Ltd , http://www.linakneader.com
The Chery Jaguar Land Rover plant in Changshu currently has an annual production capacity of 130,000 vehicles and a supporting engine factory. After the implementation of this engine expansion project, it will have the ability to produce a three-cylinder engine. According to the plan, Jaguar Land Rover will launch a 1.5L inline three-cylinder, 3.0L inline six-cylinder and other multiple displacement Ingenium series engines. The new 1.5T three-cylinder engine will use a modular design with a displacement of 0.5L per cylinder, using cylinder units of the same diameter, same stroke, and the same cylinder spacing.
Small displacement turbocharged engines are already widely used in luxury brand compact and mid-size cars. The BMW mid-size sedan 3 Series and the compact SUV X1 are already equipped with 1.5T engines; while Mercedes-Benz uses 1.6T engines on Class A, B, C and CLA models. In the future, the Jaguar midsize sedan XE is expected to be equipped with this new three-cylinder engine.
In addition to the mid-size car equipped with this engine, there will be more compact models. According to the plan, Jaguar Land Rover is expected to launch compact car XD and compact SUV models in China, both of which are expected to be equipped with a new 1.5T engine. Jaguar Land Rover Group Technical Director Nick Rogers said that with the introduction and gradual application of new technologies such as Ingenium series engines and Transcend gearboxes, Jaguar Land Rover models will have lower carbon emissions in the future, and new technologies will help Jaguar Land Rover by 2020. Further reduce carbon emissions by about 25%. 