Model NO.: SZLH560
Warranty: 1 Year
Customized: Both
Condition: New
Color: Green
Material: Steel
Capacity: 1.2-1.5t/H
Power: 90kw
Weight: 5.6ton
Trademark: Kingoro
Transport Package: Wooden Box
Specification: 3780x1700x2950mm
Origin: Jinan, China
HS Code: 8474802000
Model NO.: SZLH560
Warranty: 1 Year
Customized: Both
Condition: New
Color: Green
Material: Steel
Capacity: 1.2-1.5t/H
Power: 90kw
Weight: 5.6ton
Trademark: Kingoro
Transport Package: Wooden Box
Specification: 3780x1700x2950mm
Origin: Jinan, China
HS Code: 8474802000

Product Introduction:

Features of the product:

1. It is widely used for pellet of light substance, such as wood chips, sawdust, straw, pasture, chrysanthemum, palm leaf and so on.

2. The feeder's special structure makes materials conveyed evenly, it is specially designed for pellet of light substance with the density of 0.3-0.6g/ cm3.

3. Feeder, conditioner and chute are made of stainless steel with long service life.

4. It is with magnet and over load protection system, which can protect machine well during production.

5. Feeder is with a variable speed controlled to meet different outputs requirements.

6. It makes gear directly-connecting as the driver, and is with quick-release die fixed by clamps, which can increase the output 15% more than the same type machine with belt-convey.

7.
Vertical feeding, directly in pelletizing room, Die is static, rollers rotate; material are evenly distributed around pelletizing room because of centrifugal force, no block.

8. Double-layer die. Two layers both can be used for reduce the cost. High efficiency and save energy. Pelletizing room is also used for cooling, more options, and more gains.

9. Independent and frequent conversion discharge device can ensure the formation rate of pellet.

10. Ring die and vertical structure are good for cooling the pelletizing room.

11. Automatic oiling.

12.The machine adopt imported SKF or NSK bearings, the motor brand is china famous  brand .

 

Working principle of the product:

The pellet mill is easy to operate, we will install the machine and test machine well before delivery, once user connect it with electric power, and the raw material is delivered into the Pellet Machine through a conveyor and then conveyed into a rotating ring die by a feeder. 

Finely pulverized material will be pressed into ring die through two rotating press rollers. The resulting pressure compresses the material and extrudes it through the holes in the die. The pellet will be out directly. 

Vertical Ring Die Pellet Mills, have absorbed the quintessence of pellet mills in both domestic and international market, adopt "double-layer die" as the unique structure;Rollers are made of abrasion-proof alloy steel,improving the using lifetime of spare parts greatly;For the drive parts,the grease is filtrated automatically lubricated properly.Special design,rational structure,low power consumption,high efficiency,durable use,supplying the blank of vertical feeding of ring-die pellet mill at home,reach the international advanced level.Specialized for biomass pellets making with crushed powder of materials like Wood Chips,Branches,Tree Trunk,Barks,Plant Waste, Crop Straw,Ricehusk,Peanut shells,Bamboo and Palm fiber, etc.In the ring die pellet mill, there are radial slot throughout the die. Powder is fed into the inside of the die and spreaders evenly distribute the powder. Two rollers then compress the powder through the die holes. Two cutters are used to cut the pellets free from the outside of the die. Pellet mill used to produce animal feed, wood pellets, and fuel pellets for use in a pellet stove. Which is widely adopted in commercial and large scaleproduction lines. 
 

Requirements for the raw material: 

All kinds of wood waste or agro-forestry waste can be used, such as:

Wood waste, scobs, branch, palm tree, sugarcane residue, sawdust, medical slag, hay, discarded edible fungus bags.

Bean stalk, wheat stalk ,corn stalk, cotton stalks, sunflower stalks, mustard stalk, rice stalks, coffee husk, cotton shell, peanut shell, rice shell, coconut shell.

Livestock and poultry's waste, tea waste, tea waste, forestry wastes, forestry wastes, wood chips and many other organic waste resources. 


Parameter:
Model Power(KW) Capacity(t/h)
SZLH380 30 0.3-0.5
SZLH470 55 0.8-1.0
SZLH560 90 1.2-1.5
SZLH760 160 1.5-2.5
SZLH850 220 2.5-3.5

Detailed parts photo:

Automatic Lubrication 6-12mm Size Wood Pellet Machine
Automatic Lubrication 6-12mm Size Wood Pellet Machine

Delievery photo:

Automatic Lubrication 6-12mm Size Wood Pellet Machine

Technical support:

Automatic Lubrication 6-12mm Size Wood Pellet Machine

Company development:

Automatic Lubrication 6-12mm Size Wood Pellet Machine





 

Product Introduction:

Features of the product:

1. It is widely used for pellet of light substance, such as wood chips, sawdust, straw, pasture, chrysanthemum, palm leaf and so on.

2. The feeder's special structure makes materials conveyed evenly, it is specially designed for pellet of light substance with the density of 0.3-0.6g/ cm3.

3. Feeder, conditioner and chute are made of stainless steel with long service life.

4. It is with magnet and over load protection system, which can protect machine well during production.

5. Feeder is with a variable speed controlled to meet different outputs requirements.

6. It makes gear directly-connecting as the driver, and is with quick-release die fixed by clamps, which can increase the output 15% more than the same type machine with belt-convey.

7.
Vertical feeding, directly in pelletizing room, Die is static, rollers rotate; material are evenly distributed around pelletizing room because of centrifugal force, no block.

8. Double-layer die. Two layers both can be used for reduce the cost. High efficiency and save energy. Pelletizing room is also used for cooling, more options, and more gains.

9. Independent and frequent conversion discharge device can ensure the formation rate of pellet.

10. Ring die and vertical structure are good for cooling the pelletizing room.

11. Automatic oiling.

12.The machine adopt imported SKF or NSK bearings, the motor brand is china famous  brand .

 

Working principle of the product:

The pellet mill is easy to operate, we will install the machine and test machine well before delivery, once user connect it with electric power, and the raw material is delivered into the Pellet Machine through a conveyor and then conveyed into a rotating ring die by a feeder. 

Finely pulverized material will be pressed into ring die through two rotating press rollers. The resulting pressure compresses the material and extrudes it through the holes in the die. The pellet will be out directly. 

Vertical Ring Die Pellet Mills, have absorbed the quintessence of pellet mills in both domestic and international market, adopt "double-layer die" as the unique structure;Rollers are made of abrasion-proof alloy steel,improving the using lifetime of spare parts greatly;For the drive parts,the grease is filtrated automatically lubricated properly.Special design,rational structure,low power consumption,high efficiency,durable use,supplying the blank of vertical feeding of ring-die pellet mill at home,reach the international advanced level.Specialized for biomass pellets making with crushed powder of materials like Wood Chips,Branches,Tree Trunk,Barks,Plant Waste, Crop Straw,Ricehusk,Peanut shells,Bamboo and Palm fiber, etc.In the ring die pellet mill, there are radial slot throughout the die. Powder is fed into the inside of the die and spreaders evenly distribute the powder. Two rollers then compress the powder through the die holes. Two cutters are used to cut the pellets free from the outside of the die. Pellet mill used to produce animal feed, wood pellets, and fuel pellets for use in a pellet stove. Which is widely adopted in commercial and large scaleproduction lines. 
 

Requirements for the raw material: 

All kinds of wood waste or agro-forestry waste can be used, such as:

Wood waste, scobs, branch, palm tree, sugarcane residue, sawdust, medical slag, hay, discarded edible fungus bags.

Bean stalk, wheat stalk ,corn stalk, cotton stalks, sunflower stalks, mustard stalk, rice stalks, coffee husk, cotton shell, peanut shell, rice shell, coconut shell.

Livestock and poultry's waste, tea waste, tea waste, forestry wastes, forestry wastes, wood chips and many other organic waste resources. 


Parameter:
Model Power(KW) Capacity(t/h)
SZLH380 30 0.3-0.5
SZLH470 55 0.8-1.0
SZLH560 90 1.2-1.5
SZLH760 160 1.5-2.5
SZLH850 220 2.5-3.5

Detailed parts photo:

Automatic Lubrication 6-12mm Size Wood Pellet Machine
Automatic Lubrication 6-12mm Size Wood Pellet Machine

Delievery photo:

Automatic Lubrication 6-12mm Size Wood Pellet Machine

Technical support:

Automatic Lubrication 6-12mm Size Wood Pellet Machine

Company development:

Automatic Lubrication 6-12mm Size Wood Pellet Machine





 

Oxide Ceramics Powder

Oxide powder for thermal spray refers to a type of powder material that is used in thermal spray processes. Thermal spray is a coating technique where a material in powder form is heated and propelled onto a substrate, forming a coating.

Oxide powders are commonly used in thermal spray applications due to their high melting points, excellent wear resistance, and thermal insulation properties. They can be used to create protective coatings on various surfaces, such as metals, ceramics, and plastics.

Some common types of oxide powders used in thermal spray include:

1. Aluminum oxide (Al2O3): This oxide powder is widely used for its high hardness, wear resistance, and thermal insulation properties. It is commonly used for coating applications in industries such as aerospace, automotive, and electronics.

2. Zirconium oxide (ZrO2): Zirconium oxide powder is known for its high melting point and excellent thermal barrier properties. It is often used in thermal spray coatings for gas turbine engine components, where thermal insulation is critical.

3. Chromium oxide (Cr2O3): Chromium oxide powder is used for its high hardness, corrosion resistance, and wear resistance. It is commonly used in applications where high temperature and abrasive wear resistance are required.

4. Titanium oxide (TiO2): Titanium oxide powder is known for its high refractive index and excellent UV resistance. It is often used in thermal spray coatings for optical and decorative applications.

These oxide powders can be applied using various thermal spray techniques, such as flame spraying, plasma spraying, or high-velocity oxy-fuel (HVOF) spraying. The choice of oxide powder and thermal spray technique depends on the specific application requirements and desired coating properties.

Oxide Ceramics Powder,Pure Aluminum Oxide Powder,Chromium Oxide Ceramics Powder,Yttria Stabilized Zirconia Powder

Luoyang Golden Egret Geotools Co., Ltd , https://www.xtcmetalpowder.com