QUANTUM Bucket Elevators have successfully been installed in a wide range of applications and capacities. From process equipment, handling a few kg /hr to over 2000 t/hr with a vast range of materials. Whether your application requires a heavy-duty high capacity machine or an industrial process elevator for your factory.
We have a wealth of experience in designing the correct bucket elevator for your application and have a standard range of elevators, which can be specifically designed for, more specialised applications.
Our elevators have conveyed high temperature, high wear, abrasive, large lumpy, sticky non-flowing materials, as well as free flowing powders and granules. We supply a standard range of twin chain and belt elevators single or twin bucket design for high capacity applications such as grain, minerals and ore. The selection of the elevator depends on the material characteristics and IBS will be able to advise you and select the elevator most suited to your material and your application.
For some materials and specific applications, Quantum will design in accordance with Australian standards, suitable explosion venting and will design the structure of the elevator to suit the required application. Typical material that requires this consideration would be sugar, flour, grain and coal.
Standard features for all our bucket elevators
• Qty2 1000mm long inspection doors in conveyor leg and return leg in twin leg elevators for easy inspection of belt or chain and replacement of buckets. Inspection hatch will be provided with bolted mesh screen and safety limit switch
• Belt tracking sensor or switch for belt Bucket Elevators
Coupled with our range of standard steel and plastic buckets, elevator chain and fittings, belt tracking switches and sensors we will keep your business moving--
Bucket Elevator,Bucket Conveyor,Elevator Conveyor,Vertical Conveying Elevator Quantum Conveying Systems Yangzhou Co.,Ltd. , https://www.yzconveying.com
Model
45RCS20
55RCS25
70RCS25
70RCS30
70RCS40
Rated Single Rope Tension KN
20
25
25
30
40
Magnification
4
4
4
4
4
Rated Power of the motor KW
33
41
51.5
51.5
51.5
Working Frequency Hz
50
50
50
50
50
Hoisting Speed m/min
20/40
21/42
25/50
12/6
15/30
Hoisting Capacity t
8/4
10/5
10/5
12/6
16/8
Rope capacity
328
500
550
525
550
Nominal Diameter of Wirerope mm
13
14
14
18
20
RCS tower crane electrical control cabinet is a tower crane hoist electrical control system solution independently designed and developed by our company on the basis of advanced tower crane control technologies .It has such characteristics as high working rate,good speed regulation performance,smooth working ,high efficiency and so on.the system contains cabinets A,L and HF,cabinet A is responsible for providing power for each mechanism of the tower crane and controlling & protecting traveling mechanism;cabinet L takes charge of control and safety protection of hoisting mechanism; cabinet HF is in charge of control and protection of slewing mechanism and luffing mechanism. Temperature range:-20ºC-+40ºChumidity:lower than 85%RH(no moisture condensation)
Altitude:the altitude of installation location shall not be higher than 1000 m.power grid quality:the voltage fluctuation range shall not exceed ±10% of the rated voltage. power capacity shall be guaranteed fully.
Â
RCS mechanism
Model
45RCS20
55RCS25
70RCS25
70RCS30
70RCS40
Rated Single Rope Tension KN
20
25
25
30
40
Magnification
4
4
4
4
4
Rated Power of the motor KW
33
41
51.5
51.5
51.5
Working Frequency Hz
50
50
50
50
50
Hoisting Speed m/min
20/40
21/42
25/50
12/6
15/30
Hoisting Capacity t
8/4
10/5
10/5
12/6
16/8
Rope capacity
328
500
550
525
550
Nominal Diameter of Wirerope mm
13
14
14
18
20
RCS tower crane electrical control cabinet is a tower crane hoist electrical control system solution independently designed and developed by our company on the basis of advanced tower crane control technologies .It has such characteristics as high working rate,good speed regulation performance,smooth working ,high efficiency and so on.the system contains cabinets A,L and HF,cabinet A is responsible for providing power for each mechanism of the tower crane and controlling & protecting traveling mechanism;cabinet L takes charge of control and safety protection of hoisting mechanism; cabinet HF is in charge of control and protection of slewing mechanism and luffing mechanism. Temperature range:-20ºC-+40ºChumidity:lower than 85%RH(no moisture condensation)
Altitude:the altitude of installation location shall not be higher than 1000 m.power grid quality:the voltage fluctuation range shall not exceed ±10% of the rated voltage. power capacity shall be guaranteed fully.
Â
• Gravity elevators
• Positive discharge elevators
• Central discharge slow speed elevators
• Centrifugal elevators
Gravity Type Bucket Elevator
Quantum supply gravity discharge elevators and positive discharge elevators, supplied as close bucket discharge type, central discharge type, or Idler wheel discharge.
Generally a slow speed design gravity bucket elevator is primarily installed for elevating large lumpy & abrasive material. Our standard units are usually chain driven, either friction drive or toothed sprocket.
These elevators offer reliability with minimum wear & a positive discharge emptying of the bucket.
Centrifugal Type Bucket Elevator
Quantum standard range of centrifugal elevators are the most common type of elevator installed to most industries supplied in both belt type or chain type depending on material characteristic and the capacity being elevated and in some case the feeding method of the elevator.
Conveying type
• Segmented tooth sprocket chain type, twin chain or single dropped forged link chain
• Friction chain type elevators, European rolled chain
• Belt elevator. Using rubber belt or 100% polyester solid woven belt, nylon and steel woven belt Typical Construction
• We supply Single leg or Double leg elevators
• Lagged head Pulley
• Slatted return pulley for sticky materials
• Segmented removable sprockets for chain elevators
• Segmented and removable friction pulleys for friction drive elevators
• Fabricated boot and head section assemblies
• Fabricated 3.0m long nominal casings c/w with self-supporting frame and lateral support frames
• Dust tight sealed flanges
• Screw or counterweight tail end take up
Whether the elevator is best suited for toothed sprocket design, friction wheel on conventional belt, IBS will be able to assist with correct selection for the most reliable, maintenance free and cost effective machine to suit your material characteristic and conveying capacity for your particular application.
Types of Buckets readily available
IBS Supply a range of standard off the shelf buckets in a variety of sizes and materials.
Selection of bucket type will depend on material, material characteristics and application. Typical IBS buckets would be plastic-nylon or polyurethane and can be provide FRAS, mild steel fabricated or pressed, stainless steel fabricated or pressed and wear tips for abrasive materials.
Safety and maintenance
• Our equipment is supplied mandatory with anti-roll back device in full load condition
• All inspection doors are fitted with safety limit
• Safety factor of minimum 12: 1 to rated chain pull to installed chain or belt pull under full load stall conditions
• Fully removable split head top section.
• Clean out and inspection doors in Boot section. Self-cleaning boot section optional.
• Under speed sensor and flag disc
• All our equipment is designed to meet Australian Standards
• Selection of correct conveying velocity and material trajectory for centrifugal elevators is critical to the successful operation of a bucket elevator
• Standard wear plates on boot in-feed and head chute discharge.
• Designed to operate no more than 70% water level of selected bucket at normal operation.
• Installed power capable of full load start up under full bucket surge capacity.
• Our bucket elevators are designed for dust tight design, with suitable dust extraction points
• All our bucket elevators are designed to be self-supporting and are provided with lateral support bracing at approx. 10m centres
Replacement parts service
We can provide a range of standard bucket elevator parts using our standard head and tail pulley assemblies, conveyor belting, elevator butt straps, conveyor bolts and fittings, belt-splicing fittings.
Quantum can provide a customised service contract using experience technicians with many years` experience in servicing and troubleshooting bucket elevators in most states. This service ensures that your equipment is functional to its optimum capabilities and reduces down time parts replacement and potential damage.Our technicians have standard customer maintenance, checking and reporting procedure.
Model NO.: RCS
Sling Type: Cable
Main Girder Form: Single Girder
Power Source: Hydraulic
Trademark: SYM
Transport Package: in Nude
Specification: CE
Origin: China
HS Code: 8131499900
Model NO.: RCS
Sling Type: Cable
Main Girder Form: Single Girder
Power Source: Hydraulic
Trademark: SYM
Transport Package: in Nude
Specification: CE
Origin: China
HS Code: 8131499900
RCS mechanism