Adjustment of the Main Drive Gap of Wheeled Construction Machinery Drive Axle
1. Check and adjust the bearing clearance of the driving bevel gear. The bearing clearance of the driving bevel gear is generally 0.05-010mm. When the clearance exceeds 0.10mm, it should be adjusted: fix the dial indicator on the axle housing, and the contact of the meter is against the driving gear The outer end of the gear shaft, and then axially pry the upper flange of the gear shaft, the absolute value of the maximum and minimum readings of the dial gauge is the bearing clearance; when adjusting, you can increase or decrease the adjustment gasket between the inner ring of the driving gear bearing and the shaft shoulder. If you add a gasket, the bearing becomes loose, and vice versa.
2. Inspection and adjustment of the bearing clearance of the driven bevel gear. The normal clearance of the left and right bearings of the driven bevel gear is 0.05-0.10mm, which can be adjusted by the adjustment rings on both sides of the differential housing. First, remove the lock plate on the adjustment ring, and then twist the two adjustment rings to adjust (the two adjustment rings must be screwed in or out at the same time to ensure the meshing gap and impression of the gear pair); after adjustment, the driven gear should be It is suitable to rotate flexible and have a little resistance, but there is no loose feeling.
3. The adjustment of the thrust screw of the driven wheel loader bevel gear. For construction machinery with thrust screws on the back of the driven gear (such as ZL50 loader), the gap between the end of the thrust screw and the back of the driven gear should be 0.20-0.40mm . When adjusting, first loosen the fixing nut, then tighten the screw and back 1/3 turn, and then lock the fixing nut.
4. Inspection and adjustment of the meshing clearance and impression of the driving and driven bevel gears. Inspection methods and standards: When checking the meshing of the driving and driven bevel gears, the tooth surface of the driving bevel gear is usually coated with red lead oil first. In the case of gear meshing, turn the gear with a little resistance, and then check the traces on the Teeth of the driven gear; when meshing correctly, the contact length of the imprint should be about 2/3 of the full tooth length, and the contact traces are 2-4cm from the small end .(Main Drive,Axle Of Sdlg Loader,Pinion Ring Gear,Wheel Loader Bevel Gear)
Main Drive,Axle Of Sdlg Loader,Pinion Ring Gear,Wheel Loader Bevel Gear Jinan Union Construction Machinery Co., Ltd. , https://www.tfloaderparts.com
1)
E-mark Approved All Terrain Vehicle tire, ATV Sport Tyre 21x7.00-10, 21x7.00-8,18x9.50-8,19x7.00-8,19X9.50-8,20X9.50-8,25X12.00-9, 22x11.00-8
Golf Car Tire, Utility Vehicle Tire, Specialty Tire, Wheel
Golf cart tire/tyre, Prowl Car tire/tyre, Electric touring car tire,
(20x8.50-8 20x10.00-8)
2)
PATTERN CHARACTERISTIC:
1. mixed pattern has good combination property
2.excellent wet traction
3.suitable for all kinds of road
4.can show a good high performance,low noise,provide good driving comfortable.
3)
Comprehensive sizes for your market:
Size
Size
Size
Size
21"x7.00"-10"
130/60-10"
22"x12.00"-9"
25"x10.00"R12"
22"x10.00"-10"
205/30-11"
23"x7.00"-10"
26"x9.00"R12"
22"x11.00"-10"
205/40-14"
23"x10.00"-10"
26"x11.00"R12"
24"x8.00"-12"
15"x6.00"-6"
20"x7.00"-8"
26"x9.00"R14"
24"x11.00"-10"
16"x7.50"-8"
22"x10.00"-8"
26"x11.00"R14"
23"x10.50"-10"
16"x8.00"-7"
20"x6.00"-10"
30"x10.00"R14"
27"x14.00"-10"
18"x9.50"-8"
18"x10.00"-8"
4.80-8"
18"x7.00"-8"
19"x7.00"-8"
20"x11.00"-9"
4.10/3.50-4"
18"x9.50"-8"
19"x6.00"-10"
22"x11.00"-9"
13"*5.00"-6"
19"x7.00"-8"
20"x7.00"-8"
25"x8.00"-12"
13"*6.50"-6"
19"x9.50"-8"
20"x10.00"-9"
25"x10.00"-12"
13"*5.00"-6"
20''x10.00''-8''
20"x10.00"-10"
22"x7.00"-12"
13"*6.50"-6"
21"x7.00"-8"
20.5"x7.00"-10"
22"x10.00"-12"
4.10-4"
145/70-6"
20.5"x10.00"-10"
24"x8.00"-12"
9"*3.50"-4"
16"x6.00"-8"
21"x7.00"-10"
24"x11.00"-10"
11"*4.00"-5"
16"x7.00"-8"
22"x7.00"-10"
24"x10.00"-11"
13"*5.00"-6"
16"x8.00"-7"
22"x10.00"-8"
25"x8.00"-12"
13"*6.50"-6"
19"x7.00"-8"
22"x10.00"-10"
25"x10.00"-12"
15"*6.00"-6"
19"x9.50"-8"
23"x7.00"-10"
25"x11.00"-10"
16"*6.50"-8"
20"x10.00"-10"
25"x8.00"-12"
26"x8.00"-12"
18"*8.50"-8"
21"x8.00"-10"
25"x10.00"-12"
26"x9.00"-12"
15"*6.00"-6"
21"x10.00"-10"
25"x8.00"R12"
26"x10.00"-12"
18"*8.50"-8"
22"x10.00"-10"
25"x10.00"R12"
26"x11.00"-12"
20"*8.00"-8"
22"x11.00"-10"
26"x8.00"-14"
26"x9.00"-14"
15"*6.00"-6"
23"x7.00"-10"
26"x10.00"-14"
26"x11.00"-14"
4.10-4"
18"x10.50"-9"
205/30-12"
27"x9.00"-12"
4.10-6"
22"x11.00"-10"
205/50-10"
27"x12.00"-12"
13"*5.00"-6"
22"x10.00"-10"
225/45-9"
27"x9.00"-14"
110/100-18"
20"x7.00"-8"
225/45-10"
27"x11.00"-14"
110/100-18"
23"x7.00"-10"
20"x10.00"-9"
28"x9.00"-12"
110/90-19"
22"x10.00"-10"
20"x11.00"-9"
28"x9.00"-12"
110/90-19"
25"x8.00"-12"
16"x6.00"-8"
29"x9.00"-14
80/100-21"
25"x10.00"-12"
16"x8.50"-7"
29"x9.00"-14"
80/100-21"
25"x11.00"-12"
23"x8.00"-11"
29"x11.00"-14"
80/100-21"
145/70-6"
22"x11.00"-9"
29"x11.00"-14"
100/90-19"
16"x8.00"-7"
25"x8.00"-12"
235/30-12"
120/90-19"
22"x11.00"-8"
25"x10.00"-12"
20"x6.00"-10"
120/90-19"
16"x8.00"-7"
22"x11.00"-10"
21"x6.00"-10"
110/90-18"
18"x9.50"-8"
25"x10.00"-12"
18"x10.00"-8"
110/90-18"
19"x7.00"-8"
21"x7.00"-10"
20"x11.00"-9"
120/90-18"
3.00-4"
25"x8.00"-12"
22"x10.00"-9"
120/90-18"
145/70-6"
21"x7.00"-10"
185/30-14"
25"x8.00"-12"
19"x7.00"-8"
22"x7.00"-10"
235/30-14''
22"x10.00"-10"
145/70-6"
22"x7.00"-11"
25"x8.00"-12"
25"x10.00"-12"
19"x7.00"-8"
23"x7.00"-10"
25"x10.00"-12"
22"x11.00"-9"
18"x9.50"-8"
20"x10.00"-9"
26"x9.00"-12"
13"x5.00"-6"
20"x6.00"-10"
20"x11.00"-8"
26"x11.00"-12"
25"x8.00"-12"
21"x7.00"-10"
20"x11.00"-9"
24"x8.00"-12"
22"x10.00"-10"
22"x7.00"-10"
22"x10.00"-9"
24"x10.00"-11"
18"x9.50"-8"
4)
Why Choose us & Company capbalicity:
1) Shipping: with many ship companies keep good cooperation over ten years. 2) Warranty: Available within 18 months 3) Delivery: Very fast (7-12 days) 4) Price: Factory lowest agent price 5) Brand: We can do Customers brands, if you like our quality 6) Cooperating with world famous brands: Such as Triangle, Linglong,Cooper, Doublecoin, Doublestar, Primewell, Advance and so on 7) Natural rubber is from the best production base, Malaysia and Thailand. 8) Steel cord is from BEKAERT, Belgium, the best cord supplier in the world. 9) Key equipment imported from abroad, domestic advanced and mature equipment. 10) Japan Technology, 5 steel cord, 4 plies for steel belt and 1 ply for carcass. 11) Strict quality control, with appearance, dynamic balance and uniformity testing etc. 12) Certificates:DOT, ECE, REACH, S-MARK, GCC, 3C, EU-LABELING, SONCAP etc. 13) Supplying Grade-A quality tire, and we are responsible for any manufacture defect. 14) Cooperating with world famous factory
5)
R&D process:
* Tell us your design concept about the tire size and tread pattern
* Our engineer design for you according to your requirements
* When you're satisfied, then mold production, testing and at last bulk production.
------You can have your own brand, logo and tread pattern.
Please study this tyres information and sizes, if there is any inquiries or questions, please do not hesitate to contact us. We will try our best to support you.
Your any inquiries will be reply soon!
Â
Model NO.: 145/70-6, 19x7.00-8
Cord Material: Nylon
Inner Tube: Tubeless
Customized: Non-Customized
Condition: New
Quality Warranty: 1 Year or 100000 Km Under No Overload
OEM: We Can Do Customers Brand
Trial Agent: 1 * 40hq / Month
Delivery: Within 10 Working Days as Usual
Shipping Cost: Very Competitive !!!
Price: Very Competitive
Insurance: Quality Insurance Certificate
Payment: L/C or Tt, If Cash Is Also Welcome.
Aftersale Service: Following You Untill Sale The Last One Tyre
Trademark: PRIMEWELL / Longmarch / triangle / linglong/GITI
Specification: CE, DOT, Reach, RoHS, CCC
Origin: Shandong, China
HS Code: 40112000