Model NO.: YZG
Type: Continuous Vacuum
Name: Vacuum Dryer/ Vacuum Drying Machine
Material: Stainless Steel
Tem.: Low Tenmperature
Pressure: Negative Pressure
Pump: Water Ring Vacuum Pump
Heating Source: Hot Water or Steam
Temperature: 30-140
Trademark: CK
Transport Package: Wooden Case
Specification: CE, SGS, ISO, GMP
Origin: Changzhou
HS Code: 8419399090
Model NO.: YZG
Type: Continuous Vacuum
Name: Vacuum Dryer/ Vacuum Drying Machine
Material: Stainless Steel
Tem.: Low Tenmperature
Pressure: Negative Pressure
Pump: Water Ring Vacuum Pump
Heating Source: Hot Water or Steam
Temperature: 30-140
Trademark: CK
Transport Package: Wooden Case
Specification: CE, SGS, ISO, GMP
Origin: Changzhou
HS Code: 8419399090
Application:It's suitable for drying heat sensitive material, it's widely used in pharmaceutical, chemical, food and electronic industries.
Small Size Mini Vacuum Drying Machine for Lab
 

Features:

1.Under the condition of vacuum,the boiling point of raw material will decrease and make the evaporation efficiency increase. Therefore for a certain amount of heat transfer, the conducting area of dryer can be saved.
2. The heat source for evaporation may be low pressure steam or surplus heat steam.
3. The heat loss is less.
4.Before drying,the treatment of disinfection may be carried out during the period of drying,there is no impurity material mixed. It is in conformity.
5. It belongs to static dryer. So the shape of raw material to be dried should not be destroyed.
 
Questions before quotation:
1.       Material name
2.       Material initial moisture and final moisture\
3.       How many kg per batch or per day
4.       Heating source is steam or hot water?


Small Size Mini Vacuum Drying Machine for Lab
 

Techinical specification:
Model Name YZG-600 YZG-800 YZG-1000 YZG-1400A FZG-10 FZG-15 FZG-20
Inter size of drying chamber(mm) Φ600×976 Φ800×1247 Φ1000×1527 Φ1400×2054 1500×1060 ×1220 1500×1400 ×1220 1500×1800 ×1220
Outer size of drying chamber(mm) 1135×810 ×1024 1700×1045 ×1335 1693×1190 ×150 2386×1675 ×1920 1513×1924 ×1720 1513×1924 ×2060 1513×1924 ×2500
Layers of baking support 4 4 6 8 5 8 12
Interval of baking(mm) 82 82 102 102 122 122 122
Size of baking tray(mm) 310×600 ×45 520×410 ×45 520×410 ×45 460×640 ×45 460×640 ×45 460×640 ×45 460×640 ×45
Quantity of baking tray 4 8 12 32 20 32 48
working pressure inside the pipe of baking support(Mpa) ≤0.784 ≤0.784 ≤0.784 ≤0.784 ≤0.784 ≤0.784 ≤0.784
Operation temperature of baking support, oC 35-150 35-150 35-150 35-150 35-150 35-150 35-150
Degree of vacuum inside the chamber when operation (Mpa) -0.09~0.096
Under the condition of -0.1Mpa and 110oC,evaporation rate of water(kg/m2.hr ) 7.2 7.2 7.2 7.2 7.2 7.2 7.2
When condenser is used,Model,and power of vacuum pump(kw) 2X-15A 2KW 2X-30A 3KW 2X-30A 3KW 2X-70A 5.5KW 2X-70A 5.5KW 2X-70A 5.5KW 2X-90A 2KW
When condenser is not used,Model,and power of vacuum pump(kw) SK-0.8 2.2KW SK-2.7 4KW SK-3 5.5KW SK-6 11KW SK-3 5.5KW SK-6 11KW SK-6 11KW
Weight of drying chamber(kg ) 250 600 800 1400 1400 2100 3200
 
 
Application:It's suitable for drying heat sensitive material, it's widely used in pharmaceutical, chemical, food and electronic industries.
Small Size Mini Vacuum Drying Machine for Lab
 

Features:

1.Under the condition of vacuum,the boiling point of raw material will decrease and make the evaporation efficiency increase. Therefore for a certain amount of heat transfer, the conducting area of dryer can be saved.
2. The heat source for evaporation may be low pressure steam or surplus heat steam.
3. The heat loss is less.
4.Before drying,the treatment of disinfection may be carried out during the period of drying,there is no impurity material mixed. It is in conformity.
5. It belongs to static dryer. So the shape of raw material to be dried should not be destroyed.
 
Questions before quotation:
1.       Material name
2.       Material initial moisture and final moisture\
3.       How many kg per batch or per day
4.       Heating source is steam or hot water?


Small Size Mini Vacuum Drying Machine for Lab
 

Techinical specification:
Model Name YZG-600 YZG-800 YZG-1000 YZG-1400A FZG-10 FZG-15 FZG-20
Inter size of drying chamber(mm) Φ600×976 Φ800×1247 Φ1000×1527 Φ1400×2054 1500×1060 ×1220 1500×1400 ×1220 1500×1800 ×1220
Outer size of drying chamber(mm) 1135×810 ×1024 1700×1045 ×1335 1693×1190 ×150 2386×1675 ×1920 1513×1924 ×1720 1513×1924 ×2060 1513×1924 ×2500
Layers of baking support 4 4 6 8 5 8 12
Interval of baking(mm) 82 82 102 102 122 122 122
Size of baking tray(mm) 310×600 ×45 520×410 ×45 520×410 ×45 460×640 ×45 460×640 ×45 460×640 ×45 460×640 ×45
Quantity of baking tray 4 8 12 32 20 32 48
working pressure inside the pipe of baking support(Mpa) ≤0.784 ≤0.784 ≤0.784 ≤0.784 ≤0.784 ≤0.784 ≤0.784
Operation temperature of baking support, oC 35-150 35-150 35-150 35-150 35-150 35-150 35-150
Degree of vacuum inside the chamber when operation (Mpa) -0.09~0.096
Under the condition of -0.1Mpa and 110oC,evaporation rate of water(kg/m2.hr ) 7.2 7.2 7.2 7.2 7.2 7.2 7.2
When condenser is used,Model,and power of vacuum pump(kw) 2X-15A 2KW 2X-30A 3KW 2X-30A 3KW 2X-70A 5.5KW 2X-70A 5.5KW 2X-70A 5.5KW 2X-90A 2KW
When condenser is not used,Model,and power of vacuum pump(kw) SK-0.8 2.2KW SK-2.7 4KW SK-3 5.5KW SK-6 11KW SK-3 5.5KW SK-6 11KW SK-6 11KW
Weight of drying chamber(kg ) 250 600 800 1400 1400 2100 3200
 
 

Cobalt Based Alloy Powder

Cobalt-based alloy powders are commonly used in plasma transfer arc welding (PTAW) due to their excellent high-temperature properties and resistance to wear and corrosion. These alloys are typically composed of cobalt as the base metal, with various alloying elements such as chromium, tungsten, nickel, and carbon added to enhance specific properties.

The use of cobalt-based alloy powders in PTAW offers several advantages, including:

1. High-temperature strength: Cobalt-based alloys exhibit excellent strength and resistance to deformation at elevated temperatures, making them suitable for welding applications that involve high heat.

2. Wear resistance: These alloys have a high hardness and resistance to wear, making them ideal for welding applications where the welded parts are subjected to abrasive or erosive conditions.

3. Corrosion resistance: Cobalt-based alloys offer good resistance to corrosion, making them suitable for welding applications in aggressive environments, such as those involving chemicals or saltwater.

4. Thermal conductivity: Cobalt-based alloys have good thermal conductivity, allowing for efficient heat transfer during welding and reducing the risk of heat-affected zone (HAZ) defects.

5. Compatibility with other materials: Cobalt-based alloys can be easily welded to a wide range of base metals, including stainless steels, nickel alloys, and other cobalt-based alloys, providing versatility in welding applications.

To use cobalt-based alloy powders for PTAW, the powder is typically fed into the plasma arc using a powder feeder. The powder is then melted by the high-temperature plasma arc and deposited onto the workpiece, forming a weld bead. The specific welding parameters, such as arc current, travel speed, and powder feed rate, will depend on the specific alloy and application requirements.

It is important to note that the selection of the cobalt-based alloy powder should be based on the specific welding application and the desired properties of the final weld. Different cobalt-based a

Co Powder,Cobalt 6 Powder,Cobalt 12 Powder,Cobalt 21 Powder

Luoyang Golden Egret Geotools Co., Ltd , https://www.xtclasercladding.com