mechanical protection tape T200 is a multilayer system used for the corrosion protection of oil ,gas ,and water underground or aboveground steel pipeline. T100 &T200 consist of two layers, the butyl rubber adhesive laminated on the polyethylene film backing. The T100 can be used as inner tape, T200 can be used as outer tape.
Xunda liquid adhesive can be used as primer for this system. The liquid adhesive represent an anti-corrosion layer and provide a uniformly smooth contact surface to promote high adhesion of the coating system to the pipe.
The anti-corrosion tape assures a high bond to the primed surface with excellent conformability. The mechanical protection tape achieves a complete bond to the anti-corrosion tape.
The system can be applied by hand or with a wrapping machine.
white color tape, polyethylene backing tape,protection tape Jining Xunda Pipe Coating Material Co.,Ltd , https://www.alta-altene.comSpecifications
Injection molding machineÂ
1.Big tie bar space and shot weight capacityÂ
2.Most famous component partsÂ
3.Perfect after-service
FEATURES
- A variety of text can be switched.
- Manual, semi-automatic and fully automatic mode.
- Automatic movement monitoring with alarm and fault diagnosis.
- Function of slope setting can set the start and stop of movements, so as ensure the smooth movement
Â
CONTROL SYSTEM
All-digital control system uses dedicated controller, multiple CPU processing division,
a multi-functional automatic fault detection, alarm system, certificates 99 mold of
processing procedures, with remote control interface. System is of high stability and
responsiveness. System uses color LCD, man made interface for easy operation and
with a number of peripheral interfaces.
Â
HYDRAULIC SYSTEM
Advanced hydraulic system design, through proportional control of pressure, flow achieves rapid multi-level pressure, speed switching, the system configuration is reasonable, stable and reliable. The noise is less than 75 dB. The medium and large machine adopts a two-way cartridge inserted valve system to improve the system of flow and speed of response, and makes the whole machine reach the best performance.
Â
SERVO SYSTEM
After receiving the pressure and flow instruction from computer controller, the servo driver will compare it with the actual pressure and flow feedback, and rectify the difference by controlling the rotating speed of the servo motor. In this way, the control of injection molding is not only acurate but also fast, and the repeatabillity of the products high as well.
Technical parameters
MODELÂ
BST-4800A
INJECTIONÂ UNITÂ
 A
B
Screw diameterÂ
mm
76
78
Shot size(theoretical)Â
Cm³
1766
1860
Shot weightÂ
g
1590
1670
Injection pressureÂ
Mpa
158
150
Injection rateÂ
g/s
398
420
Screw L/D ratioÂ
L/D
20.7
20.2
Screw speedÂ
r.p.m
0-160
Nozzle DiameterÂ
Srmm
20
CLAMPINGÂ
Â
Â
Clamp tonnageÂ
KN
4800
Toggle strokeÂ
mm
710
Mould ThicknessÂ
mm
280-750
Space between tie-barsÂ
mm
750X720
Ejector strokeÂ
mm
180
Ejector tonnageÂ
KN
125
Ejector numberÂ
Piece
13
Hole DiameterÂ
mm
200
OTHERSÂ
Â
Â
Heat powerÂ
KW
23.4
Max. pump pressureÂ
MPa
16
Pump motor powerÂ
KW
15+25
Valve SizeÂ
mm
cartridge valve
Machine dimensionÂ
m
8.3X2.2X2.2
Machine weightÂ
t
16.3
Oil tank capacityÂ
L
600
Our Service
Â
Supply mode: the supplier factory delivery, simple packaging, the supplier agent consignments, the expense is payed by the buyer .
Â
Terms of payment: the buyer pay 30% of the total payment as the signing of the deposit, the contract comes into effect, pay the balance before shipment .
Â
Quality assurance: the equipment according to the enterprise standard implementation and mechanical guarantee period is one year, the main electrical appliances for half a year .
Â
Method of acceptance: equipment processing after the completion of delivery, the buyer sent to the factory acceptance, for commissioning, the buyer to provide raw materials for plastic material .
Â
Technical and after-sales service:
The supplier the following technical and after-sales service commitment
A) provide on-site installation guide;
B) responsible for the commissioning of equipment;
C) responsible for the buyer's personnel mount guard before the operation and maintenance training;
D) one year free warranty (due to the buyer's improper operation caused by damage charge costs), and ensure the supply of spare parts for a long time, only receive the cost.
E) provide technical advisory services for a long time
Â
Delivery date: the contract is signed and completed within 45 working days after receiving the deposit unit processing and manufacturing, with the conditions of the factory acceptance
Model NO.: BST-4800A
Computerized: Computerized
Certification: CE, ISO9001:2008
Name: Injection Molding Machine for Plastic Cap
Screw Diameter: 76-78mm
Shot Size: 1766-1860cm³
Shot Weight: 1590-1670g
Injection Pressure: 158-150MPa
Injection Rate: 398-420g
Screw L/D Ratio: 20.7-20.2
Screw Speed: 0-160
Nozzle Diameter: 20
Clamp Tonnage: 4800kn
Trademark: BEST Machine
Transport Package: Wooden Package or by Order
Specification: CE
Origin: China
HS Code: 8477101010