We offer value added machining in 2, 3, and 4 axis. Standard tooling, dedicated tooling, and modern machining centers ensure that the product meets spec every time! Fengfa equipment capabilities include multiple vertical and horizontal CNC machining centers, drilling and tapping stations, high-speed horizontal and vertical CNC lathes, and finishing equipment. CNC machining is suitable for a wide variety of industries, including automotive, aerospace, construction, and agriculture, and able to produce a range of products, such as automobile frames, surgical equipment, airplane engines, gears, and hand and garden tools.
CNC Machining Parts,cnc machining service,cnc lathe,cnc milling Kunshan Hongyi Tengda Mold Hardware Co.,Ltd , https://www.hdchecking.com
2. After the device is powered on, it is forbidden to touch live parts and open ventilation equipment. Never use both hands to touch the positive and negative poles of the torch at the same time.
3. When it is necessary to pull out the tungsten electrode during operation, the DC power supply must be cut off. When grinding the tungsten electrode, it is necessary to use a grinder with water jet and observe the operating rules of the grinder.
4. After touching the tungsten electrode with bare hands, it must be washed with soap or running water. Used protective equipment must not be taken out of the workshop.
5. Workplaces must be equipped with fire fighting equipment. After the work is completed, the power of the control cabinet, the DC cabinet, and the AC cabinet are cut off, and the total power is cut off. Gas cylinders and pressure gauges should be periodically sent for verification or testing.
1. Check that the equipment and tools are in good condition. After the device is powered on, first check the AC power before sending DC. Insulation shoes should be worn during work and insulation pads should be laid on the ground.