Gravity Concentration Equipment
The STL water-jacketed Gold Concentrator is a kind of gravity separation equipment. It was developed by Changchun Gold Research Institute Co., Ltd. in 1985 and entered the market. At present, it has been used in many domestic and foreign companies. It is suitable for the recovery of single gold in placer gold, vein gold mines and polymetallic mines, instead of mercury plate operations. The addition of large single gold particles in the collected ore before flotation can further increase the recovery rate of gold mines, and it can also be used from gold-bearing mines. Separate single gold from flotation gold-copper concentrate and flotation gold concentrate.
Gravity Concentration Equipment,Placer Gold Centrifugal Concentrator,Concentrator Gold,Fine Gold Concentrator,Gold Concentrator Machine Changchun Gold Research Institute Co.LTD , https://www.changchunmachine.com
Metal Deck Roll Forming Machine
Metal forming machine
Cold roll forming machine
Product Feature:
The metal deck produced by floor deck forming machine has high strength with big wave length. It adheres well to concrete. Used on high building, it not only saves steel mold plate, but also reduces the weight of storey. With the same bearing capacity, it economized steel and cuts down investment accordingly.
Machine's components:
Floor deck forming machine consists of uncoiler, coil sheet guiding device, main roll forming system, cutting device, hydraulic station, PLC control system and support table.
Main technical parameters:
1. Suitable material: Color steel sheet or galvanized steel sheet
2. Thickness of raw material: 0.8_1.2mm
4. Forming speed: About 10-15m/min
5. Power Requirement Main motor power: 11*2Kw(Depend on final design)
Hydraulic station power: 5.5Kw(Depend on final design)
6. Uncoiler's loading capacity Max. Capacity: 5000kgs (can be increased to be 10T)
7. Controlling system: Mitsubishi PLC & converter
8. Voltage: 440V 3 phase 60Hz or as per the customer's requirement
9. Machine with CE certificate.
Data sheet
Iterm
Specification
Material
Type
Color steel sheet or galvanized steel sheet
Thickness(mm)
0. 8 -1.2
Tensilestrength(mpa)
720
Roller material
45#Chrome steel
Forming speed(m/min)
About 10-15m/minÂ
Speed adjusting mode
ACÂ Frequency
Cutting mode
Hydraulic cutting
Cutter materialÂ
Cr12 mold steelÂ
Length measurement
Encoder
Control mode
Mitsubishi  PLC
Operating mode
Button + Mitsubishi Touch screen
Main motor power(kw)
11*2KW   (Depend on final design)
Hydraulic station powerÂ
5.5K W   (Depend on final design)
Uncoiler's loading capacity
Max. Capacity: 5000kgs
(can be increased to be 10T)
Machine weight
About 30000kgs
Components of machine:
Decoiler
1set  Â
Feeding & guiding device
1set
Pressing system
1set
Main roll forming machine
1set
Cutting device
1set
Hydraulic cutting system
1set
PLC Controlling system
1set
Run out tableÂ
1set  Â
Process flow:
Decoiler -- Feeding & Guiding -- Pressing--Roll Forming--Hydraulic Cutting - Product to Run Out Table