In June, domestic cars recalled more than 200,000 steering systems/transmissions into a safe "hardest hit"

Recently, according to the recall announcement announced by the official website of the AQSIQ, Geshi Automobile has sorted out the domestic car recalls in June 2018. The results show that in June this year, there were 30 announcements concerning car recalls involving 19 auto companies. For the models, the total number of recalls was 203,934, and the number of recalls was 75.31% lower than the 820,000 in May. Following the “zero recall” of the high-altitude airbag incident in May, the airbag recall in June was raised again, involving 21,174 vehicles in Nissan Sunshine, Qijun, Tulu and BYD Tengshi, accounting for 10.38% of the total recall. .

Changan Mazda's recall of 45,639 vehicles became the most recalled brand in June, accounting for 22.38% of the total recall. Mainly related to the Changan Mazda CX-5 model. The main reason for the recall is that the manufacturer's manufacturing causes the steering gear pinion heat treatment to be insufficiently tempered. In the long-term use and in extreme cases, the steering gear pinion may be damaged, affecting the direction of the vehicle, and there is a safety hazard.

In addition to airbags, the defective parts of the recalled vehicles in June include steering systems, gearboxes, engines, batteries, generators, and air conditioning systems. Among them, 90,092 vehicles involved in the hidden dangers of the steering system accounted for 44.18% of the total recall. In addition to the Changan Mazda CX-5, it also involved Fujian Mercedes-Benz V-Class and Weiwei, Chrysler Grand Cherokee and Chrysler 300C, and Nissan Infiniti. QX30 and other models. There were 41,817 recalls due to gearbox problems, accounting for 20.51% of the total recall, second only to the steering system. Mainly related to the Volkswagen Beetle series. The reason for the recall is that the grounding busbar installed at the bottom of the gearbox is too short and too tight. During driving, the grounding busbar may be broken due to the movement of the gearbox, which may cause the grounding busbar to break. The engine cannot be started and there is a safety hazard. In addition, there were six recalls due to engine problems, and a total of 18,576 vehicles were recalled, involving five brands including Subaru, Volvo, BMW, BMW Brilliance and Toyota.

According to the specific situation, Geshi Automobile conducted comprehensive statistics according to the data recalled by the AQSIQ.

Attachment: Details of domestic car recalls in June (in order of number of recalls)

1. Changan Mazda recalled 45,639 CX-5

Recall range:

Since June 12, 2018, a total of 45,639 vehicles have been recalled for the production of some CX-5 cars from May 30, 2016 to March 24, 2017.

Reason for recall:

Due to the manufacturer's manufacturing reasons, the steering gear pinion heat treatment tempering is not sufficient. In the long-term use and extreme cases, the steering gear pinion may be damaged, which may affect the direction of the vehicle and pose a safety hazard.

solution:

Changan Mazda Automobile Co., Ltd. will replace the qualified steering gear assembly for vehicles within the scope of the recall to eliminate safety hazards.

2. Volkswagen recalled 35,386 cars of the Beatles

Recall range:

From October 15, 2018, part of the imported 2012-2015 Beetle series cars, which were produced between April 24, 2012 and October 21, 2014, will be recalled. According to the company's statistics, a total of 35,386 vehicles are involved.

Reason for recall:

The vehicle involved in this recall, because the grounding busbar installed at the bottom of the gearbox is too short and too tight, may cause additional tension at the connection due to the movement of the gearbox support during driving, causing the grounding busbar to break, which may result in failure to start. The engine has safety hazards.

solution:

Volkswagen (China) Sales Co., Ltd. will entrust the Volkswagen brand imported car authorized dealers to replace the improved grounding busbar with flexible materials and extended length for the vehicles involved in the scope to eliminate potential safety hazards.

3. Fujian Mercedes-Benz recalled V-class and deterrence a total of 22,338 vehicles

Recall range:

From now on, some V-class and deterrence vehicles will be recalled for a total of 22,338 vehicles, as follows:

(1) A total of 14,871 vehicles were produced for some V-class vehicles from March 5, 2016 to October 26, 2017.

(2) A total of 7,467 vehicles were produced during the period from August 18, 2016 to October 18, 2017.

Reason for recall:

The steering parts of some vehicles in this recall range are not grounded. If the clock spring in the steering column module of the vehicle is disconnected due to foreign matter entering, the warning message of the driver's airbag will be displayed on the instrument panel and the red airbag warning light will be on. . In extreme cases, the front airbag of the driver may be triggered, posing a safety hazard.

solution:

Fujian Benz Automobile Co., Ltd. will carry out free maintenance on the vehicles within the scope of the recall, and install conductive rings and protection rings for the steering column to eliminate potential safety hazards. Before recalling the repair, if the airbag fault light is lit and an alarm message appears, the user should promptly go to the authorized service center to dispose of the vehicle.

4. Chrysler recalled 18,853 vehicles from Grand Cherokee and Chrysler 300C

Recall range:

From June 29, 2018, a total of 18,853 vehicles were imported from the 2012-2014 Grand Cherokee and the 2011-2014 Chrysler 300C. details as follows:

1. Some of the 2012-2014 Grand Cherokee cars produced during the period from June 1, 2011 to June 26, 2013, involved a total of 14,424 vehicles.

2. Part of the 2011-2014 Chrysler 300C car produced during the period from June 1, 2010 to June 26, 2013, involving a total of 4,429 vehicles.

Reason for recall:

The vehicle within the scope of this recall is due to the cyclical load of the electro-hydraulic power steering system, which may cause the diode in the generator to fail due to fatigue, causing the generator to overheat and present a safety hazard.

solution:

Chrysler (China) Auto Sales Co., Ltd. will replace the improved generators for free replacement of vehicles to eliminate defects.

5. Nissan recalled 11,110 vehicles for Sunshine, Qijun and Tuile

Recall range:

From June 22, 2018, some imported Nissan Sunshine, Qijun, and Tuile Motors, which were produced from April 5, 2001 to November 13, 2007, were recalled. According to the company's statistics, a total of 11,110 vehicles were produced.

Reason for recall:

In the scope of this recall, some of the vehicle's auxiliary passenger's airbags are equipped with an ammonium nitrate gas generator without a desiccant. When the airbag is deployed, there may be an abnormal increase in the pressure inside the gas generator, and the container may be damaged or scattered, posing a safety hazard. .

solution:

Nissan (China) Investment Co., Ltd. will replace the modified airbag gas generator or airbag module for vehicles within the recall range to eliminate safety hazards.

6. Ford recalled a total of 11,044 vehicles in the Lincoln Continental series

Recall range:

From June 15th, 2018, some of the 2017-2018 Lincoln Continental series cars were recalled. According to the company's statistics, a total of 11,044 vehicles were involved.

Reason for recall:

Some vehicles in this recall range have contact with the exhaust heat shield in the engine compartment due to the battery harness, which may cause damage to the battery harness and pose a safety hazard.

solution:

Ford Motor (China) Co., Ltd. will inspect the battery harness for vehicles within the recall range. If the harness has been damaged, the battery harness will be replaced for the vehicle. If the harness is intact, two battery harness fixing straps will be added according to the maintenance instructions to ensure the battery. There is no possibility that the harness will come into contact with the exhaust heat shield to eliminate safety hazards. Stock vehicles will be sold after the defect has been eliminated.

7. BYD recalled 10,064 vehicles

Recall range:

Since June 15, 2018, a total of 10,064 vehicles have been recalled during the period from September 19, 2014 to December 5, 2017.

Reason for recall:

For the vehicles within the scope of this recall, the front passenger occupant airbags were equipped with an ammonium nitrate gas generator without a desiccant produced by Takada. When the airbag is deployed, the gas generator may be abnormally damaged, causing debris to fly out and injuring the inside of the vehicle, posing a safety hazard.

solution:

BYD Auto Industry Co., Ltd. entrusted Shenzhen Tengshi New Energy Automobile Co., Ltd. to replace the improved front passenger occupant front airbag module for vehicles within the recall range to eliminate safety hazards.

8. Subaru recalled 9,228 vehicles of Legacy, Outback and Impreza

Recall range:

From August 20, 2018, some of the imported Legacy, Outback, and Impreza cars will be recalled. According to the company's statistics, a total of 9,228 vehicles were involved. details as follows:

(1) Some of the Legacy series cars imported from 2004 to 2009 during the period from April 5, 2004 to May 8, 2009, counted 6654.

(2) Some of the Outer series cars imported from 2006 to 2009, which were produced during the period from July 5, 2005 to May 11, 2009, were 1,540 vehicles;

(3) Some of the Impreza series cars imported from 2008 to 2009 during the period from September 28, 2007 to July 2, 2009, were counted as 1,034.

Reason for recall:

Some vehicles in this recall range are too rigid due to the rigidity of the wiring harness connected to the fuel pump, and the flexibility is insufficient. It may sway during the use of the vehicle, which may cause the contact state of the terminal to deteriorate, resulting in poor conduction, the fuel pump does not move, and when it is serious There may be a situation where the vehicle is turned off and the engine cannot be started, and there is a safety hazard.

solution:

Subaru Motors (China) Co., Ltd. will replace the wiring harness at the fuel pump plug for vehicles within the recall range. In addition, check the fuel pump and the harness connector on the body side. It is found that the discoloration and melt loss will replace the fuel pump bracket and replace the body side harness if necessary to eliminate safety hazards.

9. Mercedes-Benz recalled 7,799 vehicles for GLE SUV and S-class cars

Recall range:

From June 12, 2018, the imported Mercedes-Benz GLS SUVs and S-class cars produced during the period from January 4, 2017 to June 5, 2017 will be recalled. According to the company's statistics, a total of 7,799 vehicles.

Reason for recall:

The vehicle in the scope of this recall is not locked because the left door lock is in the locked position, and there is a safety hazard.

solution:

Mercedes-Benz (China) Automobile Sales Co., Ltd. will inspect the door locks for vehicles involved in the recall and replace them if necessary.

10. Chongqing Lifan recalled 6,431 vehicles of 330EV1, 330EV2 and 650EV1 pure electric vehicles

Recall range:

Since June 26, 2018, some Lifan 330EV1, 330EV2, and 650EV1 pure electric vehicles have been recalled, totaling 6,431 units. details as follows:

330 EV1 pure electric vehicles produced from September 16, 2015 to January 4, 2016, totaling 307;

330 EV2 pure electric vehicles produced from October 19 to December 11, 2015, totaling 4,719 vehicles;

A total of 1,405 650EV1 pure electric vehicles were produced from December 5 to December 20, 2015.

Reason for recall:

Pure electric vehicles within the scope of this recall:

1. Since the single-speed transmission for pure electric cars is used, the definition of the “P” gear of the shifting mechanism is different from that of the automatic gear “P”: the P gear is defined as the ignition gear and the return gear (time-sharing). When renting, the user must be in the gear to return the car. There is no parking or locking function (the mechanical output shaft part of the transmission is mechanically locked). It may cause the driver to mistakenly have the flat parking function for the "P" block of the car. When the P-stop is temporarily stopped during the temporary parking on the ground, the hand brake may not be pulled, and there may be a slipping of the car, which may present a safety hazard.

2, due to the reverse shift logic problem: when reversing, when the vehicle speed is lower than 5km / h, do not step on the brake shift to N gear to execute the motor without power output. When the vehicle speed is greater than or equal to 5km/h, the R gear is changed to the N gear, which is regarded as misoperation, the shift is invalid, the vehicle continues to execute the R gear, and the meter displays R. It may cause the vehicle to change from R to N when the vehicle speed is greater than or equal to 5km/h when reversing. The driver may mistake the current gear for the N gear without observing the instrument. If the accelerator pedal is accidentally stepped on, the vehicle will accelerate. Reversing, there are security risks.

solution:

Chongqing Lifan Passenger Vehicle Co., Ltd. will take the following recall measures for the recalled vehicles: 1. Free replacement of the shifting mechanism; 2. Free upgrade of the motor controller program: No power output when the knob is shifted to the N position; 3. Free Upgrade the instrument program: Display the gear position according to the optimized shift logic.

11. Volvo recalls 6,415 XC90

Recall range:

From June 5, 2018, a total of 6,415 vehicles will be recalled for the 2016 Volvo XC90, which was produced between January 15, 2015 and May 29, 2016.

Reason for recall:

Due to the manufacturer's manufacturing problems, the engine coolant discharge hose connector is insufficient in strength, which may cause coolant leakage, does not meet the relevant requirements of the standard, and has potential safety hazards.

solution:

Volvo Car Sales (Shanghai) Co., Ltd. will replace the qualified discharge hoses for vehicles within the recall range to eliminate defects.

12. BMW recalled 5,763 imported BMW, Rolls Royce and mini cars

Recall range:

From June 29, 2018, recalled some imported BMW 550i, 650i, 750Li, 760Li, X5, X6, Mini Cooper S and Rolls Royce produced between September 22, 2008 and November 19, 2011. Gust Motel, a total of 5,763 vehicles;

Reason for recall:

Some of the vehicles within the recall range may be aging and internal short circuits due to design reasons. In some cases, the pump circuit board may be overheated and melted, which increases the risk of causing the vehicle to catch fire and presents a safety hazard.

solution:

BMW (China) Automobile Trading Co., Ltd. will replace the affected vehicles with new auxiliary pump assemblies for free to eliminate defects.

13. Modern recall of Kia Weika 3,270 vehicles

Recall range:

From July 23, 2018, the number of imported Kia Witkey cars produced during the period from November 21, 2006 to April 4, 2014 will be recalled, totaling 3,270.

Reason for recall:

In the vehicle within the scope of this recall, an electric short circuit may occur due to leakage of condensate from the water temperature sensor hole at the bottom of the air conditioner (warm air assembly) housing to the lower relay box. In severe cases, a fire may occur and there is a safety hazard. .

solution:

Hyundai Motor (China) Investment Co., Ltd. installs a relay protective case free of charge for vehicles within the recall range. If it is determined that the water leakage has been damaged, replace the relay box and connector and then install the protective case to eliminate potential safety hazards.

14. Nissan recalled 3,262 Infiniti QX30

Recall range:

From June 22, 2018, part of the 2016 Infiniti QX30, which was produced during the period from July 4, 2016 to June 15, 2017, was recalled. According to the company, a total of 3,262 vehicles were collected.

Reason for recall:

The steering component of the vehicle is insufficiently grounded within the scope of this recall. If the spiral cable inside the steering column control module is disconnected due to foreign matter entering the vehicle, the red airbag warning light on the instrument panel will light up, which may trigger the front airbag of the driver. ,There are security risks.

solution:

Nissan (China) Investment Co., Ltd. will provide free maintenance for vehicles within the scope of the recall to eliminate potential safety hazards.

15. Modern recall of 2,339 Kia Ka Wah

Recall range:

From June 15, 2018, the imported Kia Ka Wah Touring Cars, which were produced between March 19, 2015 and February 12, 2018, will be recalled, totaling 2,339.

Reason for recall:

In the vehicle within the scope of this recall, the reversing force setting during the sliding door closing control is too large. If the body part of the finger is closed when the door is closed, it may not be automatically reversed, which may cause injury and pose a safety hazard.

solution:

Hyundai Motor (China) Investment Co., Ltd. upgrades the sliding door control module software for vehicles within the scope of the recall to eliminate safety hazards. Stock vehicles will be sold after eliminating defects.

16. BMW Brilliance recalls 2,001 units of 530Le

Recall range:

Since June 29, 2018, some domestic Brilliance BMW 530Le cars, which were produced between March 6, 2017 and April 27, 2018, were recalled, totaling 2,001.

Reason for recall:

Due to the design and assembly errors of the fuel pump return pipe of the vehicle within the scope of this recall, the two oil seals in the joint may be damaged, resulting in the joint not being adequately sealed. The defective return pipe may leak fuel when the fuel pump is running, which increases the risk of fire of the vehicle and presents a safety hazard.

solution:

BMW Brilliance Automotive Co., Ltd. will replace the improved fuel pump return pipe for vehicles within the scope of the recall to eliminate potential safety hazards.

17. Hyundai recalled 1,410 units of Kia Rui

Recall range:

From June 1st, 2018, the imported Kia Ruiru vehicles, which were produced between October 4, 2016 and July 14, 2017, will be recalled, involving a total of 1,410 vehicles.

Reason for recall:

In the vehicle within the scope of this recall, due to poor manufacturing of the hybrid clutch actuator, the internal oil seal of the clutch actuator may be damaged, resulting in oil leakage and short circuit inside the anti-fouling cap, posing a safety hazard.

solution:

Hyundai Motor (China) Investment Co., Ltd. replaces the anti-fouling cap and sealant for the vehicles within the scope of the recall. If the inspection confirms that the oil has leaked, replace the clutch actuator components.

18. Toyota recalls 718 Lexus GS

Recall range:

From July 25, 2018, part of the imported Lexus GS cars produced between July 14, 2008 and November 8, 2014 will be recalled. According to the company, a total of 718 vehicles are involved.

Reason for recall:

The pulsation damper of the fuel injection pipe for the port injection carried by some vehicles in this recall range may be hardened and cracked due to the influence of amine and ethanol in the fuel due to imperfect diaphragm material. It is possible that the diaphragm may be cracked. A fuel leak has occurred and there is a safety hazard.

solution:

Toyota Motor (China) Investment Co., Ltd. will replace all modified vehicles with fuel injection pipes to eliminate potential hazards.

19. Nissan recalled 196 Infiniti QX60

Recall range:

Since June 1, 2018, a total of 196 imported Infiniti QX60 vehicles have been recalled from October 10, 2017 to October 31, 2017.

Reason for recall:

Due to the manufacture of the internal components of the brake booster, some vehicles in this recall range have insufficient braking assistance during emergency braking or strong braking, and the braking distance is prolonged, posing a safety hazard.

solution:

Nissan (China) Investment Co., Ltd. will inspect the vehicles within the scope of the recall. If defective products are installed, they will be replaced with qualified brake boosters free of charge to eliminate potential safety hazards.

20. BMW Brilliance recalled 148 cars of the 1 Series sedan

Recall range:

Since July 23, 2018, a total of 148 domestically produced BMW Brilliance 118i, 120i and 125i vehicles were produced from June 9, 2017 to June 17, 2017.

Reason for recall:

Due to the supplier's production error in this recall, there may be air bubbles around the fuel tank mounting hole, so that the fuel tank wall thickness is thinner than the design value, which may cause the fuel tank to break and fuel leakage after a period of use, increasing the vehicle. The risk of fire, there are security risks.

solution:

BMW Brilliance Automotive Co., Ltd. will replace the qualified fuel tanks for vehicles within the scope of the recall to eliminate safety hazards. Emergency disposal method: Before recalling the repair, the user should drive the vehicle carefully. If the vehicle smells fuel or observes fuel leakage, contact the dealer as soon as possible for maintenance.

21. Mercedes-Benz recalls 142 G-Class cars

Recall range:

From June 28, 2018, some imported G-class cars produced during the period from April 3, 2017 to May 31, 2017 will be recalled. According to the company's statistics, a total of 142 vehicles.

Reason for recall:

In the G-class vehicle (463 platform) with V8 twin-turbo engine in this recall range, the vacuum hose of the brake booster may not meet the manufacturing specifications. Therefore, the inner wall of the four-layer brake booster hose may be stratified, which may affect the braking effect of the vehicle and pose a safety hazard.

solution:

Mercedes-Benz (China) Automobile Sales Co., Ltd. will carry out free maintenance of vehicles within the scope of the recall to eliminate hidden dangers.

22. Mercedes-Benz recalls 90 C and E cars

Recall range:

From July 6, 2018, some imported C-class and E-class cars were recalled. According to the company's statistics, a total of 90 vehicles. details as follows:

1. A total of 14 imported C-class vehicles produced between August 31, 2017 and September 13, 2017;

2. A total of 76 imported E-class cars produced between September 14, 2017 and November 28, 2017.

Reason for recall:

The welding of the left or right high-performance seat back frame of some vehicles within this recall does not meet the requirements. The skeleton cannot withstand the pressure requirements and may cause damage to the backrest frame. In the event of a collision, the risk of injury to the passenger is increased and there is a safety hazard.

solution:

Mercedes-Benz (China) Auto Sales Co., Ltd. will replace the front seat back adjustment mechanism on the affected vehicles with Mercedes-Benz authorized service providers. Stock vehicles will be sold after eliminating defects.

23. Maserati recalled 67 presidents, Geberit and Levante

Recall range:

From June 19, 2018, some of the 2018 presidents, Geberit and Levante cars were recalled. According to the company's statistics, a total of 67 vehicles are involved. details as follows:

A total of 12 vehicles will be produced from August 4, 2017 to October 9, 2017.

A total of 20 Geberit vehicles were produced between July 31, 2017 and October 26, 2017.

A total of 35 Levante vehicles will be produced between August 1, 2017 and December 12, 2017.

Reason for recall:

The vehicles within the scope of this recall were partially incomplete due to human error in the production process of the former sub-frame. After long-term use of the vehicle, the welded parts of the front sub-frame may not be firmly connected, which may cause the geometric parameters of the front sub-frame to change. In some cases, the vehicle may be difficult to control and pose a safety hazard. .

solution:

Maserati will inspect the front subframe of the vehicle involved in the recall and, if necessary, replace the front subframe to eliminate the defect. Stock vehicles will be sold after the defect has been eliminated.

24. BMW recalls 66 M5

Recall range:

From June 5, 2018, a total of 66 imported BMW M5 vehicles will be recalled from December 14, 2017 to March 26, 2018.

Reason for recall:

Some vehicles in the recall range have errors in the engine control unit due to manufacturing reasons, and the fuel pump may stop running under certain driving conditions. This may cause the engine to stop running while the vehicle is running, posing a safety hazard.

solution:

BMW (China) Automobile Trading Co., Ltd. will reprogram the engine control unit of the affected vehicle for free to eliminate defects. Stock vehicles will be sold after eliminating defects.

25. Porsche recalls Panamela 48 vehicles

Recall range:

From July 23, 2018, some of the imported Panamela cars of 2017-2018 will be recalled during the period from January 18, 2017 to May 29, 2018. According to the company's statistics, a total of 48 vehicles are involved.

Reason for recall:

In the vehicle within the scope of this recall, the connecting rod on the rear axle anti-roll bar may be loose. If the connecting rod is loose, the loose anti-roll bar may cause damage to the surrounding suspension components. In some cases, the handling performance of the vehicle may be affected and there is a safety hazard.

solution:

Porsche (China) Automobile Sales Co., Ltd. will entrust Porsche Authorized Service Centers across the country to replace the connecting rods on the rear axle anti-roll bars for vehicles within the recall range.

26. Porsche recalls 918 Spider 30

Recall range:

From June 25, 2018, the 2015 Porsche 918 Spyder will be recalled from June 23, 2014 to November 24, 2014. According to the company's statistics, there are 30 vehicles in mainland China.

Reason for recall:

For the vehicles within the scope of this recall, the connecting shafts of the front and rear axles and the connecting shafts of the lateral control arms are susceptible to stress corrosion, which may cause cracks and gradually cause the component to break. In some cases (such as driving on a track), the handling performance of the vehicle may be affected to increase the risk of collision and pose a safety hazard.

solution:

Porsche (China) Auto Sales Co., Ltd. will replace the parts involved in the recall for free. It is recommended that users of the 918 Spyder car do not drive the vehicle to participate in any track activity until the recall is completed.

27. Volkswagen recalled 28 imported Yues

Recall range:

From July 9, 2018, recalled from October 2, 2015 to October 30, 2015, some of the imported 2016 models of the Yue model cars will be produced. According to the company's statistics, a total of 28 vehicles are involved.

Reason for recall:

The vehicle involved in this recall, due to the manufacturer's manufacturing reasons, caused insufficient welding between the hook bolts and the hooks of the trailer, which may cause the trailer hook to rupture when using the trailer hook to pull other vehicles, posing a safety hazard.

solution:

Volkswagen (China) Sales Co., Ltd. will commission an authorized dealer to replace the improved trailer hook for the customer's vehicle.

28. Mercedes-Benz recalls 25 AMG GTs

Recall range:

From June 12, 2018, some imported Mercedes-Benz AMG GT cars will be recalled from March 28, 2017 to July 28, 2017. According to the company's statistics, a total of 25 vehicles.

Reason for recall:

The vehicle in the scope of this recall may be slack in the seat belt guide during the use of the driver, which may affect the protection function of the seat belt. If a collision occurs, it may increase the risk of passenger injury and there is a safety hazard.

solution:

Mercedes-Benz (China) Automobile Sales Co., Ltd. removes the belt guide ring gasket for the vehicle involved in the recall and adds other sliding parts to the belt guide.

29. Daimler recalls 20 Aktos series semi-trailer tractors

Recall range:

From July 1, 2018, the production of the Aktos series of semi-trailer tractors was partially recalled from February 2014 to February 2016. According to the company's statistics, a total of 20 vehicles were involved.

Reason for recall:

The vehicles involved in this recall may be affected during the driving process due to improper handling of a weld in the rear axle housing during the production process. If the weld is improperly handled, the axle housing may only be able to withstand or transmit a small force, and accordingly, cracks may occur or an axle breakage may occur, posing a safety hazard.

solution:

Daimlerka Bus (China) Co., Ltd. will inspect possible critical areas of the rear axle housing on the affected vehicle. If necessary, replace the rear axle to eliminate defects.

30. FAW-Volkswagen, Volkswagen recalled Audi A3, golf a total of 4 vehicles

Recall range:

The following imported vehicles will be recalled from June 15, 2018. According to the company's statistics, a total of 4 vehicles are as follows:

(1) Part of the imported 2014 and 2015 Audi A3 vehicles sold by FAW-Volkswagen Automotive Co., Ltd. from August 27, 2014 to September 11, 2014, totaling 3 vehicles.

(2) A total of 1 imported golf models for 2014, which were sold by Volkswagen (China) Sales Co., Ltd. from September 11, 2014 to September 11, 2014.

Reason for recall:

In the vehicle within the scope of this recall, when the front airbag was deployed due to an accident in a similar type of vehicle in an overseas market, the front airbag of the front passenger was ruptured, posing a safety hazard.

solution:

In order to further clarify the root cause of this case, through this recall, the parts produced in the same batch were recovered and replaced with new front passenger airbags to carry out more in-depth research and analysis on the same batch of parts to eliminate safety. Hidden dangers.