Model NO.: TC205
Trademark: SHELLMAX
Origin: China
HS Code: 85152900
Model NO.: TC205
Trademark: SHELLMAX
Origin: China
HS Code: 85152900
INVERTER ACDC TIG/MMA/CUT MACHINE TC205
IGBT advanced double inverter technology
TC-205 AC DC 4IN1 MACHINE
INVERTER AC/DC TIG/MMA/CUT MACHINE

TC-205 AC DC welder is triple functional machine
Used as MMA, ACTIG, DC TIG( pulse TIG ), welder,
All ferrous metals copper, aluminium, titanium,
And stainless steel material can be omnibearing
Welding in all position. The welding current is
Stable and stepless adjustable. The welding seam is nice.
Few spatter and low noise occurs during welding.
The welder is small volume, light in weight and easy to move.
It is particularly suitable for enterprise of pressure vessel,
Building, shipping and petrochemical works.

IGBT advanced double inverter technology;
Single phase power supply, fuse 16/21A;
Light weight;
HF arc start for TIG, arc force for MMA;
2T/4T and pulse control function for TIG;
AC/DC TIG suitable for steel, stainless steel, aluminum.
Digital display and current preset adjusting.
Can be with foot controller.
Welding cable 3m+300A holder, welding cable 3m+300A earth clamp,
TIG torch 4m, gas hose 5m, cutting torch 4.5m
CE, ROHS.
Over heating and current protection.
Model TC-205P AC/D C
input voltage AC220/230/240V  50Hz
 
AC TIG		 No load voltage 60-80V
Base Current Adjusting range 20-220A
AC balance 30-70%
AC square wave frequency 20-100Hz
Rated Duty Cycle 35%
 
 
 
DC TIG		 Pulse current adjusting range 10-220A
Rated Duty Cycle 35%
Current down-slope time 0~10S
Base Current Adjusting range 20-220A
Pluse Width Ratio 0.1~0.9
Pluse Frequency 0.5~25Hz
After flow time 1~25S
Arc starting Mode High frequency arc striking
 
DC MMA		 No load voltage 60-80V
Base Current Adjusting range 10-180A
Rate output current 180A
Rated Duty Cycle 35%
 
CUT		 (Base) Current Adjusting range 18-50A
Rated Duty Cycle 35%
Efficiency ≥83%
Mass 25KG
Protection Class of enclosure IP21S
Outline dimensions mm 2 430X200X290
 
Packing list
 
TC-205P AC/DC 4 in 1 machine		  
1
Ground clamp 1
TIG welding torch WP-26 1
Welding holder 1
Gas inlet pipe 1
Air pressure Regulator 1
Cutting torch WSD-60 1
Electrode 5
TIP 1.0 5
Ceramic shield 3
Operation instructions 1
INVERTER ACDC TIG/MMA/CUT MACHINE TC205
IGBT advanced double inverter technology
TC-205 AC DC 4IN1 MACHINE
INVERTER AC/DC TIG/MMA/CUT MACHINE

TC-205 AC DC welder is triple functional machine
Used as MMA, ACTIG, DC TIG( pulse TIG ), welder,
All ferrous metals copper, aluminium, titanium,
And stainless steel material can be omnibearing
Welding in all position. The welding current is
Stable and stepless adjustable. The welding seam is nice.
Few spatter and low noise occurs during welding.
The welder is small volume, light in weight and easy to move.
It is particularly suitable for enterprise of pressure vessel,
Building, shipping and petrochemical works.

IGBT advanced double inverter technology;
Single phase power supply, fuse 16/21A;
Light weight;
HF arc start for TIG, arc force for MMA;
2T/4T and pulse control function for TIG;
AC/DC TIG suitable for steel, stainless steel, aluminum.
Digital display and current preset adjusting.
Can be with foot controller.
Welding cable 3m+300A holder, welding cable 3m+300A earth clamp,
TIG torch 4m, gas hose 5m, cutting torch 4.5m
CE, ROHS.
Over heating and current protection.
Model TC-205P AC/D C
input voltage AC220/230/240V  50Hz
 
AC TIG		 No load voltage 60-80V
Base Current Adjusting range 20-220A
AC balance 30-70%
AC square wave frequency 20-100Hz
Rated Duty Cycle 35%
 
 
 
DC TIG		 Pulse current adjusting range 10-220A
Rated Duty Cycle 35%
Current down-slope time 0~10S
Base Current Adjusting range 20-220A
Pluse Width Ratio 0.1~0.9
Pluse Frequency 0.5~25Hz
After flow time 1~25S
Arc starting Mode High frequency arc striking
 
DC MMA		 No load voltage 60-80V
Base Current Adjusting range 10-180A
Rate output current 180A
Rated Duty Cycle 35%
 
CUT		 (Base) Current Adjusting range 18-50A
Rated Duty Cycle 35%
Efficiency ≥83%
Mass 25KG
Protection Class of enclosure IP21S
Outline dimensions mm 2 430X200X290
 
Packing list
 
TC-205P AC/DC 4 in 1 machine		  
1
Ground clamp 1
TIG welding torch WP-26 1
Welding holder 1
Gas inlet pipe 1
Air pressure Regulator 1
Cutting torch WSD-60 1
Electrode 5
TIP 1.0 5
Ceramic shield 3
Operation instructions 1

Industrial Wire Stripping Machine

cable stripping machine

Stripping wire insulation can be an essential task for an electrical job
or a way to make money on scrap devices.


Many scrap yards pay for the bare copper or other metals of the wire,
but often the wire is insulated in a plastic cover.


Getting the wire out of the insulation would take forever using the traditional wire stripping hand tool.


Fortunately, you can make your own wire stripper to strips reams of scrap wire by simply pulling the insulated wire over a sharp point.

Industrial Wire Stripping Machine

Armored Cable Stripper, Heavy Duty Wire Stripping Machine, Industrial Cable Stripping Machine,Stripping Wire Insulation

TAIZHOU GUANGLONG WIRE STRIPPING MACHINE MANUFACTURING CO.,LTD , https://www.scrap-wire-stripper.com