Haotian focused on explaining some faults in the salt spray test chamber Wooden Based Powdered Activated Carbon Wooden Based Powdered Activated Carbon,Wood Powder Activated Carbon,Wood Powdered Activated Carbon,Decolorization Powder Activated Carbon Shanxi Xinhui Activated Carbon Co.,Ltd. , https://www.shanxixinhuicarbon.com
When the user is operating, the device may have various faults due to improper operation or the device itself. This article specifically for everyone to summarize the various methods of the salt spray test machine to solve the problem, easy to see the list, the disease is naturally removed! The salt spray test machine has the functions of damp heat, salt spray and mold, and has the name of “three defenses†in artificial climate. It is widely used in salt spray corrosion tests on plating, coating, etc. of products, parts, metal materials and products of electronics, electricians and automobiles, motorcycles and hardware tools.
Fault 1 : It can't work normally after turning on the power
Trouble-shooting method: Check if the water level in the heating water tank is too low. When the water level is too low, the equipment will cut off the power supply to ensure the safety of the equipment; therefore, when such a fault occurs, please check the heating water tank first. The water level, if it still fails to operate normally after discharging such faults, it must be a functional failure of the salt spray test machine, and it can be debugged and repaired by the Dongguan Haotian after-sales department.
Fault 2 : The temperature inside the chassis of the salt spray test cannot rise to the set value.
Troubleshooting method: 1. If the temperature setting of the laboratory temperature controller is too low, we can set the temperature controller to the required temperature. 2. If the laboratory safety switch is set too low, we can set the safety switch to the desired temperature. 3. If there is a failure in the heating system, electromagnetic relay or controller, the repair and repair department of Dongguan Haotian will be carried out.
Fault 3 : There is normal spray and the air compressor is not working properly.
Trouble-shooting method: Under normal circumstances, for the safety of equipment, the air compressor of the salt spray test machine is generally equipped with an automatic protection system. When an abnormal use of the salt spray test machine occurs, the air pressure machine automatically stops running. When this type of failure occurs, you can use it as usual.
Fault four : salt spray test machine equipment spray does not count
Troubleshooting method: When such a fault occurs, immediately check if the laboratory temperature rises to the specified temperature, because if the temperature does not reach the preset temperature, the timing device must assume that the experiment has not started yet, so this type of fault can be checked by the preset temperature. It can be discharged with the actual temperature; of course, it may be because the set time and the spray time are the same, resulting in the inability to observe the timing.
Fault 5 : The touch screen does not respond
Trouble-shooting method: Since the salt spray test machine equipment is gradually becoming intelligent, the salt spray test machine that is now manufactured by the factory mostly adopts the touch screen; after the factors of screen lock are eliminated, the post-sales department of Dongguan City can be debugged and repaired.
Fault 6 : The saturated barrel of the salt spray test machine cannot rise to the set value
Troubleshooting method: 1. If the temperature of the saturated barrel temperature controller is too low, we can set the temperature controller to the desired temperature. 2. If the saturated barrel safety switch is set too low, we can set the safety switch to the desired temperature. 3. If the heating system, electromagnetic relay, and controller are faulty, the repair and repair department of Dongguan Haotian will be carried out.