Guide idlers are also called stub idlers, limiting idlers, track-guiding idlers. Guide idlers are are designed to prevent belts from tracking off. usually by contact with the edge of the belt. They can be used on both the trough and return side of the conveyor belt. The problem with many guide idlers is the design itself. A conveyor belt can quickly wear down the steel of the guide roll to make it unusable.
Guide rollers are also called stub rollers, limiting rollers, track-guiding rollers, snub rollers or lateral guide rollers. Guide Idler and Conveyor Belt Tracking Guide, was developed during the 1940's to assure reliable Belt Conveyor Tracking in the following industries: Guide idlers are properly mounted at the sides of the belt so that they keeping it aligned if there are run outs. Continuous belt rubbing against the guide idlers might cause damage (edge wear) of the belt. In that case further check of the conveyor items (pulleys, idlers, etc) and structure should take place. Guide idlers are available in various diameters and lengths.
Guide Idler usually use Ball Bearing.
Guide Idler Guide Idler,Side Guide Idler,Guide Wheel Front Idler Shandong Xinkaite Bearing Co., Ltd. , https://www.idlerbearing.nl
Ghana Glazed Steel Step Tile Roof Roll Forming MachineÂ
Steel Step Tile Roll Forming Machine
Components for the Machine:
The roll forming machine includes manual uncoiler unit, infeed guide, fixed position driven forming stations, pressing die, cutting equipment, hydraulic station, PLC console and manual unload product run out table
Â
Material specification
Aluminum, alu-zinc, galvanized and pre-painted galvanized steel.
Thickness
0.3-0.7mm.
Main motor power
5.5 kw.
Hydraulic station power
5.5kw.
Feeding width
1200mm.
Cover width
925mm
Yield stress
235Mpa (33KSI) ~ 345Mpa (50KSI).
Roll forming Speed
15-18 m/min
Cutting Tolerance
+/-2.5mm(length≤5000mm); +/-3.0mm(5000mm
Manual Uncoiler
Max. Capacity: 5000kgs.
Coil inner diameter
508mm.
Voltage
380V,3 Phase,50HZ,Or As per customer's request.
Numbers of stands
17 stations
Type of cutting
Roll-formed and length-set profile cutting.
3. Material of Main Equipment:
Roller Material
High grade S45C forged steel, coated with hard chrome.
Active Shaft Material
High grade S45C carbon wrought steel, diameter 76mm.
Electric Elements
PLC control console, touch screen and transducer, from Siemens, Germany.
Other elements, from Schneider Electric, Germany.
Cutter Blades
Cr12MoV steel with quenched treatment, hardness HRC58~61,
wear-resistance, good steel structure, long life.
Process Sketch:
Uncoiling →Infeed guiding →Roll forming →Pressing→Measure Length&Shearing →Sheet to Support Table
Packaging & Shipping
1.One 40ft container for loading one set machine with manual decoiler;
2.The whole Wiped Anti Rust Oil, PLC controller covered by foam film;Â
3.Spare parts and some small parts packed in plastic tooling box;Â
4.All Components Fixed by steel wire with Container.
FAQ
Q:Are you a manufacturer?
A:Yes absolutely. Welcome a lot for your visiting to us.
Q:What's the delivery time?
A:Normaly will take 60days
Q:Do you have after-sale support?
A:Yes, we're always here for giving you advice and support for technical details since we have senior technician.Â
Q:Is there quality control when manufacturing the lines?
A:Yes, we have a group of team who will be responsible for quality control from laying off the raw material, processing the rollers and the other parts, make treatment on the roller surface and shaft, assembling, testing and packaging.
Q:What's your strength comparing to the other supplier?
A:We'll supplying you the best quality and service. We'll give you good advise beyond your requirements. The lines are easily for installation and with low mantenance requirements.
Model NO.: WLFM 25-185-925
Type: Steel Tile Roll Forming Machine
Model Number: Wlfm 27-185-925A Steel Tile
Material: PPGI,PPGL,Pre-Painted Steel Sheet
Controller: Siemens PLC
Thickness: 0.3-0.7mm
Yield Stress: 235-345 MPa
Max.Forming Speed: 15-18m/Min
Total Motor Power: 11 Kw
Warranty: 1 Year
After-Sales Service Provided: Engineers Available to Service Machinery Overseas
Trademark: WILLING INT′L
Transport Package: Sea Worthy Fixed by Wire Rope, Wooden Blocks
Specification: CE Standard, ISO 9001-2008
Origin: China R. P
HS Code: 84552210
Steel Tile Roll Forming Machine