Hot Melt Adhesive For Garment And Shoe
Hot melt adhesive for shoes refers to a general term for a class of hot melt adhesive products used in the field of shoe processing, which is not a single model of hot melt adhesive film products. Due to the diversity of shoe-making materials, there are many types of hot melt adhesives used in the field of shoe materials. To make a simple summary, the common types of tpu hot melt film with low temperature release film, and the types of pa and tpu hot melt omens.
So, what are the characteristics of using hot melt adhesive as a adhesive for shoe materials compared with traditional white glue and yellow glue? The characteristics of hot melt adhesive for shoes compared with traditional shoe adhesive are mainly in the following aspects: Hot Melt Adhesive For Garment And Shoe,Hot Melt Adhesive For Hat,Hot Melt Adhesive For Clothing,Non Slip Sock Hot Melt Glue Shenzhen Tongde New Materials Technology Co., Ltd. , https://www.tdhotmeltglue.com
Contact Information
Lewis Liu
Foreign Trade Salesman
Mobile:+86-137 9111 8265
Â
If you are interested in our trucks, please feel free to contact me at any time.
Welcome to vist our factory!
Add: D2601, Donghuan International Plaza, Jinan, China
Fax:+0531-83532996
Zip/Postal Code 250031
Â
Chassis Model
ZZ1317N3867N1,ZZ1317V3867N1,ZZ1317N4667N1,ZZ1317V4667N1
Driving Type
8X4
CabinÂ
A7-W cab, with one sleeper and two seats, 2-arm windscreen wiper system with three speeds, damped adjustable driver's seat, with heating and ventilating system, exterior sun visor, safety belts,  adjustable steering wheel, air horn,air conditioner , with transverse stabilizer,with 4-point support fully floating suspension + shock absorber.
A7-V--HOWO high roof cabin. Basic configuration is with double sleeper. and others is similar to the A7-W.
EngineÂ
Make: SINOTRUKÂ
Diesel 4-stroke direct injection diesel engineÂ
Engine model: WD615.47,  371 HP;D12.42-20,420HP;WD615.69.336HP;
Emission :Euro 2Â
6-cylinder in-line with water cooling, turbo-charging and intercoolingÂ
Displacement: 9.726 LÂ /11.596
TransmissionÂ
HW19710/HW13710, 10F &Â 2RÂ
SteeringÂ
ZF power steering, modol ZF8118, hydraulic steering with power assitance;
Front Axle
HF9, 1x9000 KGSÂ
Steering with doubleT-cross section beamÂ
Rear AxleÂ
HC16, 2x16000 KGSÂ Â
Pressed axle housing, central single reduction with hub reduction,with differential locks between wheels and axles. Â
Ratio:4.42
Propeller ShaftÂ
Double universal joint propeller shaft with gear-shaped coupling flange
ChassisÂ
Frame: Uprofile parallel ladder frame with section of 300x80x8mm,reinforced subframe all cold riveted cross members
Front suspension:10 semi elliptic leaf spring, hydraulic telescopic double-action shock absorbers and stabilizer
Rear suspension:12 leaf semi elliptic springs, bogie spring and stabilizer
BrakeÂ
Service brake: dual circuit compressed air brakeÂ
Parking brake (emergency brake): spring energy, compressed air operating on front shaft and rear wheelsÂ
Auxiliary brake: engine exhaust brake
ElectricsÂ
Operating voltage: 24 V, negative grounded
Starter: 24 V, 5.4 Kw
Alternator: 3-phase, 28 V, 1500 W
Batteries: 2Â x 12 V, 165 Ah
Cigar-lighter, horn, headlamps, fog lights, brake lights, indicators and reverse light
Tyres
12.00R20(11), one spare tyre
Fuel Tank
400L
Cargo Body
Length:7.1M,7.65M,9.5M;Width:2.3M;Height:0.6-1.5M
Overall Dimension Â
11600*2550*3400 mm
Contact Information
Lewis Liu
Foreign Trade Salesman
Mobile:+86-137 9111 8265
Â
If you are interested in our trucks, please feel free to contact me at any time.
Welcome to vist our factory!
Add: D2601, Donghuan International Plaza, Jinan, China
Fax:+0531-83532996
Zip/Postal Code 250031
Â
Chassis Model
ZZ1317N3867N1,ZZ1317V3867N1,ZZ1317N4667N1,ZZ1317V4667N1
Driving Type
8X4
CabinÂ
A7-W cab, with one sleeper and two seats, 2-arm windscreen wiper system with three speeds, damped adjustable driver's seat, with heating and ventilating system, exterior sun visor, safety belts,  adjustable steering wheel, air horn,air conditioner , with transverse stabilizer,with 4-point support fully floating suspension + shock absorber.
A7-V--HOWO high roof cabin. Basic configuration is with double sleeper. and others is similar to the A7-W.
EngineÂ
Make: SINOTRUKÂ
Diesel 4-stroke direct injection diesel engineÂ
Engine model: WD615.47,  371 HP;D12.42-20,420HP;WD615.69.336HP;
Emission :Euro 2Â
6-cylinder in-line with water cooling, turbo-charging and intercoolingÂ
Displacement: 9.726 LÂ /11.596
TransmissionÂ
HW19710/HW13710, 10F &Â 2RÂ
SteeringÂ
ZF power steering, modol ZF8118, hydraulic steering with power assitance;
Front Axle
HF9, 1x9000 KGSÂ
Steering with doubleT-cross section beamÂ
Rear AxleÂ
HC16, 2x16000 KGSÂ Â
Pressed axle housing, central single reduction with hub reduction,with differential locks between wheels and axles. Â
Ratio:4.42
Propeller ShaftÂ
Double universal joint propeller shaft with gear-shaped coupling flange
ChassisÂ
Frame: Uprofile parallel ladder frame with section of 300x80x8mm,reinforced subframe all cold riveted cross members
Front suspension:10 semi elliptic leaf spring, hydraulic telescopic double-action shock absorbers and stabilizer
Rear suspension:12 leaf semi elliptic springs, bogie spring and stabilizer
BrakeÂ
Service brake: dual circuit compressed air brakeÂ
Parking brake (emergency brake): spring energy, compressed air operating on front shaft and rear wheelsÂ
Auxiliary brake: engine exhaust brake
ElectricsÂ
Operating voltage: 24 V, negative grounded
Starter: 24 V, 5.4 Kw
Alternator: 3-phase, 28 V, 1500 W
Batteries: 2Â x 12 V, 165 Ah
Cigar-lighter, horn, headlamps, fog lights, brake lights, indicators and reverse light
Tyres
12.00R20(11), one spare tyre
Fuel Tank
400L
Cargo Body
Length:7.1M,7.65M,9.5M;Width:2.3M;Height:0.6-1.5M
Overall Dimension Â
11600*2550*3400 mm
1, more environmentally friendly than traditional adhesives, both for the production of operators, or consumers are more healthy;
2, better air permeability: especially for shoes with high air permeability requirements, the air permeability of hot melt adhesive will be better than traditional adhesives;
3, better bonding strength: from the perspective of the composite effect, the bonding strength of hot melt adhesive is better than that of traditional glue;
4, from the production point of view: hot melt adhesive is easy to continuous operation, can greatly increase the production efficiency of the enterprise.
Model NO.: ZZ1317V4667N1
Seats: ≤5
Horsepower: 351-450hp
Engine Capacity: ＞8L
Tire Certification: ISO
Tire Design: Radial
Condition: New
Trademark: SINOTRUK HOWO A7
Transport Package: Nude Packing
Specification: 11600*2550*3400 mm
Origin: China
Model NO.: ZZ1317V4667N1
Seats: ≤5
Horsepower: 351-450hp
Engine Capacity: ＞8L
Tire Certification: ISO
Tire Design: Radial
Condition: New
Trademark: SINOTRUK HOWO A7
Transport Package: Nude Packing
Specification: 11600*2550*3400 mm
Origin: China