Big crusher technology has gradually improved

When replacing the woven screen, the vibrating screen shall ensure that there is an equal gap between the two sides of the screen box and the screen hooks. Firstly, the intermediate clamped flat steel is fastened, and at the same time, the tensile tight tensioner keeps the screen surface uniform in tension and is used by hand. Hammer tapped along the entire length to check the tension. If the contact is not good, the tension is not enough or uneven, which is one of the important reasons for premature mesh damage.

When the gold mine equipment is used again, the guide angle of the tensioning plate is adjustable. When installing the screen, loosen the guide angle bolts so that they can be moved up and down. After the screen is properly placed, tighten the tension bolts. A slight pressure is applied to the tension plate, and then the guide angle steel is driven until the screen abuts against the screen and the bracket, and then firmly tighten the guide angle bolts. The length of the screen hook strip must be the same as the length of the tension plate.


The technology of the large crusher has achieved results in basic theory through the development of foreign countries. Various countries around the world will develop and utilize vibration crushing technology in various forms. In particular, there will be a large expansion in applications. The quartz sand dryer is suitable for Various models of material crushing will appear one after another, and crushers of new structures using vibration technology will continue to emerge.